User Guide

TRENDnetUser’sGuide TV‐IP420P
©Copyright2016TRENDnet.AllRightsReserved. 34


Authentication
Algorithm:
Choose the authentication method to verify the
sourceofinformation:MD5orSHA.
Authentication
Password:
Specifytheauthenticationpasswordbetween8to32
letters.
Private‐key
Algorithm:
ChoosetheprivacykeytoencryptSNMPmessages:
DESorAES.
Private‐key
Password:
Specifytheprivacykeybetween8to32letters.

SNMPOtherSettings
SNMPPort: SNMPserviceportnumber.
ClickSavetosavethechanges

802.1X
Setup802.1Xforremoteauthenticationservice.

802.1XAuthentication
EnableIEEE
802.1X:
Check this box to enable 802.1X authentication
service.
EAPOLversion: Extensible Authentication Protocol (EAP) over LAN
(EAPoL).Chooseversion1or2.Thisversionnumber
hastomatchtoyour802.1XserviceEAPOLversion.
UserName:
Entertheaccountname.
Password:
Enterthepassword.
Confirm:
Enterthepasswordagain.
ClickSavetosavethechanges


