User Guide

TRENDnetUser’sGuide TV‐IP420P
©Copyright2016TRENDnet.AllRightsReserved. 45

Enable
Tamper
Detection:
Checkthisboxtoenabletamperdetection.ClickSave
tosavethesettings.
DrawArea: ClickDrawAreabuttontostartdrawing.Clickanddrag
ontheareayouwanttosetupthetamperdetection.
You can setup only one area for tamper detection.
ClickStopDrawingtostopdrawingmotiondetection 
areas.Thegrayblockrepresentsthedetectionarea.
Sensitivity: Movetheslidertoadjustdetectionsensitivity.
ClearAll: Clickthisbuttontoclearallthesetupareas.

ArmingSchedule
Edit: Click Edit to edit the recording schedule. The Edit
Schedulewindowwillpopup.

1. Selectdayoftheweekyouwanttoedit.
2. SelectAllDayorCustomizedscheduleofthe
day.
3. Setthetimeperiodandtheeventyouwant
totriggerthevideorecordingcontinuous
(alwaysrecording)ormotiondetection.
4. ClickSelectAllortheweekdayyouwantto
havethesamescheduleondifferentday.
5. Clickanotherdayoftheweekbyclickingon
itstabtosetthenextschedule.ClickOK 
whenyouhavefinishedyoursettings.

Notification
SendEmail: Checkthisboxtosendan e‐mailnotificationwhen
motionisdetected.
ClickSavetosavethechanges