User Guide

TRENDnetUser’sGuide TV‐IP420P
©Copyright2016TRENDnet.AllRightsReserved. 54
Limit
Thecameracanbeprogrammedtomovewithintheconfiguredstops.(left,right,upor
down)

Steps
1. ChecktheEnableLimitboxandselectManualStopsorScanStopsfromthe
LimitTypelist.
a. Whenmanuallimitstopsreset,youcanoperatethePTZcontrolpanel
manuallyonlyinthelimitedarea.
b. Whenscanlimitstopsareset,allthescanactionsareperformed
only
inthelimitedarea.
2. ClickthePTLcontrolbuttonstofindtheleft/right/up/downstoplimits,youcan
alsocallthepresetsandsetthemasthelimitsforthecamera.
3. ClickSettosavethelimitsandCleartoclearthelimits.


InitialPosition
Setthecamerainitialposition,youcanalsocallapresetfortheposition.ClickSetto
savethelimitsandCleartoclearthelimits. 







