User Guide

TRENDnetUser’sGuide TV‐IP420P
©Copyright2016TRENDnet.AllRightsReserved. 9
SetupYourCamerawithCD
1. InserttheIns tallation CD‐ROM intoyour computer’sCD‐ROM driveto
initiatetheAuto‐Runprogram.Chooseyourpreferredlanguageandthen
clicktheInstallCamera.

2. WritedowntheMACAddressofthecamera.


3. ConnectaPoEcapablenetworkcabletothecamera’snetwork
portand 
thentoaPoEswitchandwaitforthecameratobootup,clickNext.
*Apoweradapter(soldseparately)canbeusedinsteadofPoEswitch.


4. Waitwhiletheutilityissearchesforthecamera.
