User's Guide

  

©Copyright2014TRENDnet.AllRightsReserved.  


TRENDnetUser’sGuide

TV‐IP450PI
20
TimeSettings
Theaccuracyofthesystemclockisimportantforschedulingandaccuratelogging.You
cansynchronizethesystemtimewithyourcomputer,orautomaticallycheckthetime
accuracywithanetworktimeserver(NTPserver).
 

AutomaticUpdate
NTPServer:
Specifyatimeserver(NTPserver)tosynchronize
with.(e.g.pool.ntp.org)
Interval:
Thetimeintervalthatthecamera willsynchronize
thetimewithNTPserver.Default:1440minutes(24
hours).
ClickSavetosavethechanges

ManualTimeSync.
DeviceTime:
Thesystemtimeofthiscamera.
SetTime:
Clickthecalendariconandmanuallyselectthe
date.
ChecktheSync.withcomputertimetocopythe
timefromyourcomputer.
ClickSavetosavethechanges

DaylightSavings
Setupdaylightsettingsforthecamera.


DaylightSaving
EnableDST:
Checkthisboxifyourtimezonehasdaylight
savings
StartTime:
Enterthedatethatdaylightsavingsstarts
EndTime:
Enterthedatethatdaylightsavingsends
DSTBias:
Enterhowmuchtimethedaylight savingadjusted
bydaylightsavings
ClickSavetosavethechanges


