User's Guide

TV-IP512WN ProView Wireless N Internet Camera

Port Detail settings menu

Wireless Setup

The TV-IP512WN Wireless

Network Camera supports

normal wireless LAN functions

for 802.11b/g/n wireless

networks including WEP or

WPA basic security settings.

The wireless camera also

supports WPS (Wi-Fi Protected

Setup) for quick and easy

wireless security setup.

Wireless Configuration menu

Click to select the Enable Wireless box to conduct an automatic Site Survey and detect available

SSID’s. Select the desired SSID from the pull-down menu. The SSID can also be configured

manually by typing in the name of the SSID in the SSID field. Choose the Wireless Mode to

determine if the wireless operates in Infrastructure (default) or Ad-Hoc mode. Select the Channel

used or use the Auto (default) option to find the channel used for the selected SSID. Choose the

preferred Authentication and Encryption used. Configure WEP, WPA-PSK or WPA2-PSK

settings to suit the security environment of your wireless LAN and click the OK button to implement

the new security settings.

Site Survey

The pull-down menu displays available networks. To connect one wireless network, scroll up and

down in the list and highlight to select the desired network and it is listed in the SSID field. Click

Rescan to conduct a new search for available networks.

SSID

The Service Set Identifier (SSID) is the name assigned to the wireless network. It will auto-detect

and display the SSID of wireless network connected in this box. This default setting will let the

camera connect to ANY access point under the infrastructure network mode.

Wireless Mode

Choose Infrastructure (default) if there is an available wireless access point within range or Ad-

Hoc mode to access the camera directly from another computer such as a wireless laptop.

Channel

This pull-down menu provides the wireless channel for communication. Select the appropriate

channel from the list provided depending on the regulatory region where the unit is sold or use the

Auto option.

WEP Authentication

Open communicates the key across the network. Shared allows communication only with other

devices with identical WEP Encryption settings. Enter the key used for WEP encryption in the Key

field.

A Pre-Shared Key is used to identify each other in the network. If encryption is enabled on the

router or access point in the network, enter the same encryption key in the Key field to access the

device in camera.