Quick Installation Guide TV-IP6 1 2 P 1.
Table of Contents English 1. Before You Start 2. Hardware Installation and Configuration 3. Power over Ethernet (PoE) Installation 1 1 2 7 Troubleshooting 9 Version 08.20.
1. Before You Start Package Contents TV-IP612P ? ? CD-ROM (Utility and User’s Guide) ? Multi-Language Quick Installation Guide ? Cat. 5 Ethernet Cable (1.5m/5ft.) ? Mounting Kit ? Power Adapter (12V DC, 2A) System Requirements A computer with a wired network adapter properly installed ? CD-ROM Drive ? ? VGA Resolution: 800 x 600 or above ? Web Browser: Internet Explorer (6.0 or higher) ? Router ? An available DHCP Server –routers usually have a built-in DHCP server ? Power over Ethernet (PoE) Switch (e.g.
2. Hardware Installation and Configuration Note: 1． It is recommended that you configure the IP Camera from a wired computer. 2． If you would like to use IPViewPro 2.0 software, please install the software by clicking the Install IPView Pro 2.0 in the Autorun window and refer to the User's Guide on the CD for more information 1. Insert the Utility CD-ROM into your CD-ROM drive. 2. Click Run autorun.exe (Windows 7/Vista only). 3. Click Setup Wizard. 4. Click Next.
. Click Close. 6. Double click on the SetupWizard icon on your desktop. 7. Connect a RJ-45 network cable from a Switch/Router to the Ethernet port on the IP Camera. 8. Connect the Power Adapter to the IP Camera and then to a power outlet. 9. Click Next. 10. Select the IP camera and click Next. 10. Enter your ID and password. Then click Next.
12. Configure the Camera Name and Camera Time. Click Copy Local Time to automatically configure the Camera Time to match your computer. Then click Next. 13. If you would like to change the administrator password, click Change Password, enter a new password, retype the new password and then click Next. Leave Change Password unchecked if you do not wish to change the password. Note: Password is limited to up to 8 characters. 14. Select DHCP and then click Next. 15. Click Next. 16.
17. Click on the following URL or click Link to open up the browser configuration. 18. Enter the User name and Password, and then click OK. By default: User Name: admin Password: admin 19. Click Live View to view live video. 20. Right click on the information bar and select Install This Add-on for All Users on This Computer. (Internet Explorer 8) 21. Click Install. (Internet Explorer 8) 22. Right click on the information bar and select Run Add-on (Internet Explorer 6/7).
23. Click Run (Internet Explorer 6/7). 24. Live Video will now appear. 25. Use the command icons to control the IP camera. Your installation is complete For detailed information regarding the TV-IP612P configuration and advanced settings, please refer to the Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's website at http://www.trendnet.com.
3. Power over Ethernet (PoE) Installation Using the TV-IP612P with a PoE switch 1. Connect a RJ-45 cable from the Power Over Ethernet switch (e.g. TPE-80WS) to the LAN port on the IP Camera. 2. Verify that the LINK (RED) and Power (Solid Blue) LEDs are on.
Using the TV-IP612P with an Injector (TPE-111GI) 1. Connect the Power Cord to the Injector. Then connect the Power Cord to an outlet. 2. Connect a CAT-5e/6 cable from a switch to the TPE-111GI's DATA IN port. 3. Connect a CAT-5e/6 cable from the TV-IP612P to the TPE-111GI's DATA OUT port. 4. Verify that the LINK (RED) and Power (Solid Blue) LEDs are on.
Troubleshooting 1. I inserted the Utility CD-ROM into my computer's CD-ROM Drive but the installation menu does not appear automatically. What should I do? 1. For Windows 7, if the installation menu does not appear automatically, click on the Windows Icon on the bottom left hand corner of the screen,, click the “Search programs and files” box, and type D:\autorun.exe, where “D” in “D:\autorun.exe” is the letter assigned to your CD-ROM Drive, and then press the ENTER key on your keyboard . 2.
Copyr ight ©2 0 1 0 . All Rights Reser ved. TRENDnet.
