User's Guide

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP751WC/ TV-IP751WIC
22
Video
 Video Resolution: Select from one of the three resolutions. Higher values
provide better quality but at the expense of higher bandwidth requirements on
your network or internet connection.
 Compression Rate: Select a compression rate. Higher rates of compression will
reduce network load at the expense of lower image quality.
 Frame Rate (Frames/Sec.): Select the number of frames per second you would
like for your video. Higher rates provide smoother video but require more
bandwidth on your network or internet connection.
 Brightness Control: Allows you to control the brightness level. Enter a value
between 1 and 128.
 Contrast Control: Allows you to control the contrast level. Enter a value
between 1 and 128.
 Saturation Control: Allows you to control the saturation level. Enter a value
between 1 and 128.
 Light Frequency: Select the correct frequency (50Hz/60Hz) to reduce the
amount of flicker.
 Mirror: Choose whether to mirror the image horizontally or vertically.
 Anti-Flicker: Check the box to enable anti-flicker.
Audio
 Audio: Choose whether to Enable or Disable the camera audio feed.
 Volume: Select the volume percentage level.
Wireless
 Connection Mode: Infrastructure is a wireless connection using an access point
as a transmission point of all wireless devices. Ad-Hoc is a wireless connection
used without an access point, where your TV-IP751WC or TV-IP751WIC is
directly connected to your PC. This is done using the on-board wireless