Quick Installation Guide

10
9. Initializing the drives will erase all data on them. Click “OK” on the warning pop-up then click “OK” after the drives finish initializing
to complete the setup wizard.
10. The NVR will scan the network for available cameras. If your cameras do not appear, click the “Search” button to rescan the
network. Select the desired cameras then click “Add”. When you are finished adding cameras click Next”.
L... Capacity Status Property Type Free Space
1 149.02GB Normal RW Local 0MB
Initialize
Initialization will erase all data on the HDD.
Continue?
No. IP Address Model Nu... Protocol Manageme... Subnet M
SearchAdd
1 10.18.4.30 TV-IP310PI TRENDnet3 8000 255.255.
Next