TRENDnet User’s Guide Cover Page
TRENDnet User’s Guide Table of Contents Table of contents Camera Settings Menu ................................................................... 22 Camera Connection Settings ....................................................................................... 22 Product Overview ............................................................................. 5 Camera installations .......................................................................................... 22 Package Contents ..........
TRENDnet User’s Guide Table of contents Live View ...................................................................................................................... 42 Format / Initiate the Hard Drive .................................................................................. 56 General .............................................................................................................. 42 View ..........................................................................................
TRENDnet User’s Guide Table of contents System ............................................................................................................... 84 Network ............................................................................................................. 89 Video .................................................................................................................. 91 Events ................................................................................................
TV‐NVR408 TRENDnet User’s Guide Features Product Overview TRENDnet’s standalone 8‐channel H.265 PoE+ NVR, model TV‐ NVR408, offers a comprehensive rack mountable camera management solution. The NVR networks and powers up to eight PoE cameras*. Install up to 12TB of storage (hard drives not included) to record over one month of continuous video from eight 1080p HD PoE cameras**. The TV‐NVR408 features advanced video playback and comes with a free iOS®/Android™ app.
TV‐NVR408 TRENDnet User’s Guide USB Ports One USB port for the included mouse and one for video export Mouse Included Supports mouse and keyboard (keyboard not included) Rackmount Rackmount hardware included Mobile App View live video on a mobile device with the free iOS® and Android™ apps Remote Access Access the NVR over the internet Camera Management For each camera, manage on‐screen display (OSD), image settings, PTZ functionality, motion detection, privacy masks, tamper detection, and video loss Vide
TV‐NVR408 TRENDnet User’s Guide Rear View Product Hardware Features LED Front View USB 2.0 port Network port HDMI Port Power port Audio Ports VGA Port PoE Ports Push button control Menu controls Ground Power: USB: Push button: Menu controls: Connect to optical mouse and/or external USB flash drive for file import or export. Switch between cameras Toggle between menu selections Power button USB 2.0 port Audio In: Audio Out: VGA: HDMI: Power socket of camera (48V DC, 1.
TV‐NVR408 TRENDnet User’s Guide Setup Wizard If you are accessing the DVR for the first time, the device will go through these basic settings. Please follow the onscreen display to complete these information. 1. 2. 3. Create the unlock pattern for quick access later. 4. Select Language and click Apply to continue If you are accessing the DVR the first time, please activate the device by following the password setup. Once the new password is set, the device will be activated.
TV‐NVR408 TRENDnet User’s Guide 5. Enter the password again 6. Click the selection list to the right of Time Zone. 7. Select your time zone. 5. Time Zone 6. Date Format 7. Date 8. Time © Copyright 2018 TRENDnet. All Rights Reserved.
TV‐NVR408 TRENDnet User’s Guide 8. Click the selection list to the right of Date Format and then select a date format. 10. Click the selection list to the right of System Time and then enter the time with 24‐hour format then click Next. 9. Click the selection list to the right of System Date. 11. Display current network type Select the year by clicking on left or right arrow. Select the month by clicking on left or right arrow. Select the day by clicking on the date.
TRENDnet User’s Guide 12. Configure the port related settings here. TV‐NVR408 13. Click OK to exit the wizard if you have a brand new installation. Select the hard drive and then click Init to initiate your hard drive if you are running the setup wizard in later time and want to clean up the video on the hard drive. Then click OK. © Copyright 2018 TRENDnet. All Rights Reserved.
TV‐NVR408 TRENDnet User’s Guide 14. Select type of recording method you would like to set the cameras to be. This settings can also be configure later under recording section. Start Recording You can start recording immediately just with a few clicks. In Live View, right click on the mouse. A short menu will come up. Choose Start Recording and then Continuous Record. Click Yes to start continuous recording. Instant Playback 15. Click OK to complete the Wizard installation.
TV‐NVR408 TRENDnet User’s Guide System Management (local) Single Screen: Display video live view one at a time. Click on Single Screen and then choose the camera you want. (The video you choose will be replaced with other video if the auto‐switch is on, and the auto‐switch is on by default.) Multi‐screen: Display all four video live views at the same time. By default, the video live view is set in the Multi‐screen mode.
TV‐NVR408 TRENDnet User’s Guide Playback: PTZ Control: Previous Screen: In Single Screen mode, you can manually switch the video to the previous channel. Next Screen: In Single Screen mode, you can manually switch the video to the next channel. Stop/ Start Auto‐ switch: Start Recording: Click Playback to go full playback menu. Click this to open the PTZ control panel for the supported cameras Start (default) or stop automatic live view switch.
TRENDnet User’s Guide Picture Mode: TV‐NVR408 Select a monitor display setting from Standard, Bright, Gentle, and Vivid of your choice. Click OK to confirm your choice. © Copyright 2018 TRENDnet. All Rights Reserved.
TV‐NVR408 TRENDnet User’s Guide Shortcut Menu Instant playback Each video in live view has a short cut menu to perform the frequent adjustments of the video. Move your mouse pointer over the camera display you want to bring up the Shortcut Menu. Click on the video. The frame of the video shows active (yellow frame). And then click on the button of the selected jobs. Click on to playback the last 5 minutes of recording. Audio Click on to enable the audio on selected channel. Click to mute the audio.
TV‐NVR408 TRENDnet User’s Guide Advanced PTZ PTZ Configuration You can further control zoom, focus, and aperture with compliant PTZ camera. Click on + or – to adjust zoom, focus and aperture (iris). Click button, the camera will turning it around continuously. Click the button again to stop moving. Quickly access the PTZ presets by clicking the One‐touch button and to access the preset settings, click on the General button. Special features (Feature availability depends on camera models) Menu.
TV‐NVR408 TRENDnet User’s Guide Image settings Live view strategy Click on Click on to manage the live view strategy. The Real‐time strategy allocate all resources to minimize the delay of video delivery. When the network is congested, the video may be interrupted. Fluency strategy makes larger video buffer to save and play video back. It makes the communication more robust, but the live view playback timing is delayed.
TV‐NVR408 TRENDnet User’s Guide Using the Main Menu Login to the Management Pages Right click your mouse while you are viewing the live video. The short menu will be popped out. Mouse over the Menu and click the button to bring up the Main Menu. The NVR will ask you to enter the password every time you want to login to the management page. Enter the password and then click on OK to bring up the main menu. © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV‐NVR408 Restore Default Password You can reset the device password by going into the management pages and reset the unit to default or use the utility. The utility can be downloaded at http://www.trendnet.com/camerautility 1. Run the utility and select the device that requires the password reset and click on Forgot Password. 2. Click Export to export the XML file then contact our helpdesk. http://www.trendnet.com/support/helpdesk © Copyright 2018 TRENDnet. All Rights Reserved.
TV‐NVR408 TRENDnet User’s Guide Logout, start up, or shut down the NVR The NVR is a class A network equipment designed for 24/7 operation. Just plug‐in the power source, the NVR is up and running. When you want to change the NVR settings, manage the cameras proceed system maintenance or software upgrade, you need to log in, log out, restart, or shut down your NVR gently.
TV‐NVR408 TRENDnet User’s Guide sequential number as the major index number. Camera Settings Menu Setting and manage your cameras by bring up the main menu. Click on Camera Settings Menu Status: : The camera is online. You can click on the icon to show the video and identify which camera you are setting. icon. : The camera is not connected to NVR Camera Connection Settings IP Camera Address: This is the IP address detected by the NVR or set statically to the camera.
TV‐NVR408 TRENDnet User’s Guide Refresh: Back: Net Receive Idle Bandwidth: camera passwords are synchronized. Plug‐and‐Play installation Click refresh to refresh the camera list. Only the cameras listed with valid camera index number (1 to 4) are connected to the NVR. Other cameras listed on the table are cameras on the network, but not connected. You can double click on the listed camera, more detailed information will be showed up. The information is valuable for manual camera settings.
TV‐NVR408 TRENDnet User’s Guide Manual installation 1. Click the Edit icon and then select Manual on Adding Method. 2. Enter the camera IP address. 3. Select the protocol. (See compatible camera list for more details) 4. Management port. (See compatible camera list for more details) 5. Choose the camera video channel number or leave it with default channel 1. © Copyright 2018 TRENDnet. All Rights Reserved.
TV‐NVR408 TRENDnet User’s Guide 6. Enter camera access user name. On screen Display Settings Compatible camera on screen display can be changed directly through camera access or through NVR. Note: Please reference compatible camera list for more details. 7. Enter camera access password. 8. Click OK to save the settings. Camera: Click to choose the camera you want to change the settings. Camera Name: The name of the chosen camera. Display Name: Check this box to display camera name.
TV‐NVR408 TRENDnet User’s Guide image HUE setting. Default: 128 Display Settings Adjust video image quality, lightness, and color settings here. Mirror: Note: Please reference compatible camera list for more details. Choose horizontal, vertical or both to adapt to the physical installation. Click Apply to apply the settings. Camera: Camera Name: Click to choose the camera you want to change the settings. The name of the chosen camera.
TV‐NVR408 TRENDnet User’s Guide Display settings Basic pan and tilt Control PTZ camera’s video shooting position, patrol route, zoom, focus, and iris. All compatible PTZ cameras can do the basic pan and tilt to adjust the video shooting position. Click the buttons you want to pan or tilt the camera. Adjust the distance of each step of moving by sliding the Speed. Each step can have farther distance when sliding the Speed toward the right, and vice versa.
TV‐NVR408 TRENDnet User’s Guide 2. 3. 4. Adjust the zoom, focus and aperture. Select Save Preset. Click the number of preset. Running the pattern of behaviors: Click to start running the pattern. Click to stop recording. Patrol You can setup up to 255 presets depends on camera’s capability. To access preset number more than 17, click on . The preset selection screen will pop up. Click Setup detailed patrol route with key points, speed toward the key point and stop by duration.
TV‐NVR408 TRENDnet User’s Guide 2. To erase a key point, click on the key point. If you want to edit a key point, just erase the key point and then add a new one. 3. Click or 4. Click to clean up all key points. to move the order of the patrol key points. Start or stop a patrol: Click to start patrol. Click to stop patrol. Motion Detection Set up how the motion detection event will be triggered and what actions will be triggered.
TV‐NVR408 TRENDnet User’s Guide Trigger channel By default, a motion detection generated by the camera will only trigger the events on that channel. If you want to trigger event on other channels, select the channel number or select All for all channels. 1. Select day of the week you want to edit on the row of Week. 2. Enter the period of time you want to actively detect the motion events. Copy to: Arming schedule To quickly setup the same schedule over the week, click Copy.
TV‐NVR408 TRENDnet User’s Guide Linkage action Privacy Mask When motion event detected, the corresponding actions will be executed. Create a masking area to keep your privacy. Note: Please reference compatible camera list for more details. Full Screen Monitoring: Audible Warning: Send Email: Switch the video on the VGA/HDMI monitor to the camera detected motion event. Activate the audible on board buzzer. Send email to notify the system manager.
TV‐NVR408 TRENDnet User’s Guide Video Tamper Video tamper settings Detects if a camera has been tampered with and surveillance is compromised. You can set up video tamper notifications to alert the system manager to check the camera. Click Settings to bring out the detailed set up menu. Arming Schedule Note: Please reference compatible camera list for more details. Camera: Enable Tamper‐ proof: Draw Area: Clear: Sensitivity: 1. Select day of the week you want to edit on the row of Week. 2.
TV‐NVR408 TRENDnet User’s Guide Copy to: To quickly setup the same schedule over the week, click Copy. Click another day of the week (1: Monday, 2: Tuesday, 3: Wednesday, 4: Thursday, 5: Friday, 6: Saturday and 7: Sunday). Click All to select the whole week. Click OK after you select the day of the week you want to copy to. Linkage action When motion event detected, the corresponding actions will be executed.
TV‐NVR408 TRENDnet User’s Guide Video Loss Video loss settings Detects if a camera has lost its video. You can set up video loss notifications to alert the system manager to check the camera. Click Settings to bring out the detailed set up menu. Camera: Arming Schedule 1. Select day of the week you want to edit on the row of Week. 2. Enter the period of time you want to actively detect the motion events. Click to choose the camera you want to change the settings.
TV‐NVR408 TRENDnet User’s Guide Copy to: To quickly setup the same schedule over the week, click Copy. Click another day of the week (1: Monday, 2: Tuesday, 3: Wednesday, 4: Thursday, 5: Friday, 6: Saturday and 7: Sunday). Click All to select the whole week. Click OK after you select the day of the week you want to copy to. Linkage action When motion event detected, the corresponding actions will be executed.
TV‐NVR408 TRENDnet User’s Guide Configuration Menu Setting and manage your NVR system by bring up the main menu. Click on icon. Configuration Menu System Settings General Set up the basic time, display resolution, and operation settings here. Time Zone: Click the selection list to the right of Time Zone. Date Format: Click the selection list to the right of Date Format and then select a date format. System Date: Click the selection list to the right of System Date.
TV‐NVR408 TRENDnet User’s Guide DST settings More settings Set up Daylight Saving Time. Daylight saving time Auto DST adjustment: Enable DST: More settings The daylight saving time adjustment is setting to automatic adjustment according to the time zone setting by default. If you want to set the daylight settings manually, uncheck this box to disable the automatic DST adjustment. Manually enable or disable daylight saving time adjustment.
TV‐NVR408 TRENDnet User’s Guide Network IPv6 Address 1: IPv6 self‐assigned address including the subnet prefix expression in the end of the string. IPv6 Address 2: IPv6 static address including the subnet prefix expression in the end of the string. Set up NVR network, DDNS, NTP, Email, and UPnP settings. General Setup the network interface connecting to the Internet. IPv6 Default Gateway: MAC Address: MTU: The default route going further from IPv6 subnet The MAC address of the NVR network interface.
TV‐NVR408 TRENDnet User’s Guide DDNS NTP Dynamic Domain Name Service, DDNS, allows you to find your NVR from the Internet with an easy to remember domain name. Network Time Protocol Service. The accuracy of the system clock is important for scheduling and accurate logging. You can automatically check the time accuracy with a network time server (NTP server). DDNS Enable DDNS: DDNS Type: Check this box to enable DDNS Service. Select a DDNS service provider: dyn.com or no‐ip.com.
TV‐NVR408 TRENDnet User’s Guide Email Select Receiver: Select the pull down menu to select the receiver you want to set up the detail. You can send to 3 accounts at the same time, but just set up separately. Receiver: The receiver’s name. Receiver’s Address: The receiver’s email address. Set up email accounts for notifications. *Note: Many ISPs does not allow service port 25 going through their network. Please consult your email service provider and ISP for detail. Click Apply to apply the changes.
TV‐NVR408 TRENDnet User’s Guide More settings UPnP Universal Plug‐and‐Play is a device discovery protocol set. It allows your camera to easily be found, for example, on a Windows operation system. More Settings UPnP Enable UPnP: Mapping Type: Check this box to enable UPnP connection. Choose Manual or Auto port mapping. UPnP List Port Type: Edit: External Port: Mapping IP Port: Status: The service type on the UPnP port Click the icon to manually edit the port mapping.
TV‐NVR408 TRENDnet User’s Guide Live View Event Output: Change the live view settings. Full Screen Monitoring Dwelling Time: Define where the video is going out when event triggered. The NVR is set to both VGA and HDMI. When event triggered full screen display, who long the video is going to stay on the screen. Default: 10 seconds. Click Apply to apply the changes. View Setting live view display arrangement and sequence.
TV‐NVR408 TRENDnet User’s Guide To remove a camera from the display, just click on to remove the channel the selected cell number. Channel‐Zero Encoding Setting camera to certain frame rate and bit rates. To assign a channel to a display cell, choose the camera from the camera list. Note: Each video channel can be assigned to one display and cell. Click on camera when it is not assigned double click on the list if it is currently assigned to other display cell.
TV‐NVR408 TRENDnet User’s Guide maintenance tools on the NVR checking and managing your hard drive. See page 55 for more detail.) Exceptions Setup the action when exception happened. Select the exception you want to monitor and then choose the audible warning or email notification. Click Apply to apply the changes and remember to setup your email account if you choose the email notification.
TV‐NVR408 TRENDnet User’s Guide User Accounts You can setup up to 16 user accounts to access the camera’s video stream with a web browser or real time video stream (RTSP). Only one administrator account (username: admin) can be setup to configure the NVR and cannot be deleted. User: Password: Confirm: Enter the user name. Enter the password. Enter the password again. Level: Select the user’s level from Guest or Operator for the preset permissions.
TV‐NVR408 TRENDnet User’s Guide Permission: Local configuration Permission: Remote configuration Local Log Search: Search the NVR log with local login. Remote Log Search: Search the NVR log with web login. Local Parameters Settings: Setting NVR with local login. Remote Parameters Settings: Setting NVR with web login. Local Camera Management: Local Advanced Operation: Local Shutdown / Reboot: Manage cameras on NVR with local login. Setting NVR advanced features with local login.
TV‐NVR408 TRENDnet User’s Guide Maintenance Menu Manage your NVR system by bring up the main menu. Click on System Maintenance Menu icon. System Maintenance Permission: Camera configuration Camera Permission: The camera management permission list: System Information is displaying here for system maintenance. NVR information Remote Live View: Viewing video through the network. Local Manual Operation: Manage camera settings with local NVR login.
TV‐NVR408 TRENDnet User’s Guide Camera information Recording Information Camera Information NVR Recording Status Information Camera No.: Camera Name: Status: Motion Detection: Tamper‐proof: Video Loss: The channel number camera assigned into. Camera device name Showing the camera is connected or disconnected. Showing the status and setup of the camera motion detection. Showing the status and setup of the camera video tamper detection. Showing the status and setup of the video loss detection.
TV‐NVR408 TRENDnet User’s Guide Storage Information Network Information NVR Network Interface Information NIC: IPv4 Address: IPv4 Subnet Mask: Network Interface Card. LAN1 is the assigned network interface which represent to the non‐PoE network port.
TV‐NVR408 TRENDnet User’s Guide Log Information All NVR activities are registered on the log. Find the activity by searching with time range and log type. Click Search to start the search. Log Search IP conflict, network disconnect, recording exception, IP camera disconnection, IP camera address conflict, recording buffer overflow. Operation: Log Search Start Time: End Time: The starting time of a log search. The end time of the time range for the log search.
TV‐NVR408 TRENDnet User’s Guide Export Log Export Click Export on this page to export log on the list. To export all logs saved on NVR, click the Log Export tab, select the hard drive, and then click Export. Click Export again to export the log to the USB drive of your choice. Select the USB drive on the Device Name and then click Refresh if you want to change the drive. Click New Folder to create a new folder on current directory. Click Format to format this USB storage.
TV‐NVR408 TRENDnet User’s Guide Import/Export Configuration Settings To save current or load previous NVR settings, choose the Import / Export page and then export the file to the USB drive or import the file. 1. 2. 3. 4. 5. If a firmware upgrade is available, download the firmware to your computer. Unzip the file to a folder on your computer. Read the firmware upgrade instruction for specific version update information. Log into the NVR. Getting to this Maintenance page to upgrade firmware.
TV‐NVR408 TRENDnet User’s Guide Network Monitoring Traffic To monitor the network traffic, navigate to the traffic chart. Factory Default To reset the NVR to the factory default, navigate to this Default page and then click on OK to reset all NVR settings back to factory default. Traffic LAN1: The network interface. Sending: The network traffic generated from the NVR. Receiving: The network traffic receiving by the NVR. Link Status: The network linking status. Type: Type of network, Ethernet.
TV‐NVR408 TRENDnet User’s Guide Network Tools Use network tools (Network Detection) on the NVR to test the network status. Network packet export Capture packets and save to external USB storage for network analysis. Plug‐in your USB network drive and then click Export to export the packet capture files. Click Refresh to list the directory on your USB storage again. Network Statistics To review the network statistic information, navigate to the Network Statistics page.
TV‐NVR408 TRENDnet User’s Guide Hard Drive Maintenance and conveyance tests. S.M.A.R.T Settings S.M.A.R.T.: Click The S.M.A.R.T. (Self‐Monitoring, Analysis and Reporting Technology) is a monitoring technology to detect and report on various performance and reliability factors to help predict and prevent disk failures. to start S.M.A.R.T. test. Temperature: The temperature of the hard drive in Celsius. Power on days: Days the hard drive is on. Self‐evaluation: The result of self‐evaluation.
TV‐NVR408 TRENDnet User’s Guide Bad Sector Detection HDD No.: The Disk number. The NVR has one HDD. Capacity: The total hard drive storage capacity after formatting. Type of Select key area detection or full detection. Detections: Detect: Click this button to start bad sector detection. Hard Drive Management Manage and allocate your storage space by bring up the main menu. Click on HDD Menu icon.
TV‐NVR408 TRENDnet User’s Guide Advanced Storage Quota Settings Click Copy to copy the same quota setting to other channel. To set up the disk quota for each channel video recording, select the camera and then enter the maximum recording capacity. Click Apply to apply the changes. Scheduled recording Setup the video recording settings by bring up the main menu. Click on Scheduled Recording Menu icon.
TV‐NVR408 TRENDnet User’s Guide 1. Select channel. 2. Select recording type. Choose from Continuous or Motion recording. If you want to clear out some scheduled recording time, choose None. 3. 4. If you want to define the schedule in finer intervals, click on Edit button. 5. Make your selection and then click Apply to apply the changes. Select the time slots you want to make the scheduled recording. Each time slot represents a half hour interval.
TV‐NVR408 TRENDnet User’s Guide Start/End Time: Type: Specify the starting and end of recording time in 24‐hour format. Select Continuous or Motion Detection recording Video Settings Set up the video quality for recording (main stream), the higher video quality require larger storage space and better network condition. Please choose the best profile of your choice. Copy to: To quickly setup the same schedule over the week, click Copy.
TV‐NVR408 TRENDnet User’s Guide Stream Type: Resolution: Bitrate type: Video Quality: Frame rate: Max. Bitrate Mode: Max. Bitrate: Max. Bitrate Range Recommended: Pre‐Record: Post‐Record: Expired Time: Record Audio: Select you want to stream video only or video and audio. Select the video resolution. The bitrate is the rate of information generated from the video. The higher bitrate means more data and more traffic and better video quality.
TV‐NVR408 TRENDnet User’s Guide Max. Bitrate Mode: Max. Bitrate: Max. Bitrate Range Recommended: want to take in each second. Advanced recording setting Select General to set the maximum bitrate in certain brackets. Choose Customized to set the maximum bitrate on your own. Setup if the NVR can overwrite the previous video recording or not. If you checked this option, the NVR will overwrite old recordings when the disk is full.
TV‐NVR408 TRENDnet User’s Guide Backup Video Recordings Quickly and backup and export your video recordings with the file exporting menu. Bring up the main menu then click on Export Menu icon. Export Select the video channel and range of time and then click on Search to search the video you want to export. Click Quick Export if you want to export all video recordings. Edit Holiday Schedule Holiday Name: Enable: Mode: Change the holiday name to meaningful name instead of index numbers.
TV‐NVR408 TRENDnet User’s Guide Quick export Export with search Click Export again to export all the video recordings to the USB drive of your choice. Select the USB drive on the Device Name and then click Refresh if you want to change the drive. Click New Folder to create a new folder on current directory. Click Format to format this USB storage. Select the video clips you want to export by check or uncheck the video clip. Then click Export to export the video recordings.
TV‐NVR408 TRENDnet User’s Guide Click to lock the video clip. When video is locked, the video clip is not going to . The warning message be overwrite accidentally. To unlock the video clip, click will remind you again you are unlocking the video clip. Click Yes if you want to proceed unlock. Video playback Bring up the main menu then click on Export Menu icon. Click Export again to export the video recordings to the USB drive of your choice.
TV‐NVR408 TRENDnet User’s Guide Playback screen Channel Selection Type of Playback Live View Recording search Action Buttons Playback Buttons Time Line Scale Buttons © Copyright 2018 TRENDnet. All Rights Reserved.
TV‐NVR408 TRENDnet User’s Guide Search for video recordings Playback buttons Check on the camera you want to see the playback or check on Camera to select all channels. Then, choose the date for the recording. If there are video recording in selected channel, the date on the calendar will show blue. Double click the date to start playback. Use playback controls to play back the video recording. Click this button to play the video backward. Click this button to play the video.
TV‐NVR408 TRENDnet User’s Guide Playback operations Tagging More playback operations such as mute the audio, clip a customized video, add and manage tags, and zoom in the viewing are available on the action buttons section. Tagging on video recordings help you to mark the critical time of video recording and easier tracking and editing. Find the video is critical and click on the tag with default tag name “tag”. Click on The audio is on. Click this button to mute the audio.
TV‐NVR408 TRENDnet User’s Guide Playback modes The video playback not only can playback the video recorded on the hard drive indexed by the time. You can also search the video with motion detection event, tag, or playback the video stored on the USB external hard drive. Use the scroll bar to browse the recordings and adjust the pre‐play and post‐play between 5 seconds and the maximum amount of a single section of recording to decide the length of playback before and after the motion event.
TRENDnet User’s Guide TV‐NVR408 The tags searched are showed on the list. Click to view the video. Use the scroll bar to browse the recordings and adjust the pre‐play and post‐play between 5 seconds and the maximum amount of a single section of recording to decide the length of playback before and after the motion event. © Copyright 2018 TRENDnet. All Rights Reserved.
TV‐NVR408 TRENDnet User’s Guide External file Access your NVR with the Web Browser To playback the video files saved on the USB drive, click and select the External File playback mode. Default Settings and Factory Reset Select the USB device to browse the files. Click Refresh to update the list when necessary. To manage your NVR through the web browser, you have to setup the network connection first.
TV‐NVR408 TRENDnet User’s Guide System Requirement 3. The NVR management page will detect if you installed the camera video streaming plug‐in or not. Click the link to download the plug‐in from NVR. 4. Click on Run to install the web plug‐in for the cameras. 5. Permission request may show up depends on the Internet security settings on your computer. Click More Info and then Run anyway to install the plug‐ in.
TV‐NVR408 TRENDnet User’s Guide 6. Click Next to install the plug‐in. 7. Click Finish to finish the installation. 8. Open the browser and login again. 9. (Go to step 11 if you already changed your password). The NVR will ask you to change your password from default setting. Please enter the new password twice and click OK. The password must be between 8 and 16 characters. (Alphanumeric: a‐z, A‐Z, 0‐9, !, @, #, $). 10. Enter the user name admin and new password again to start secured session.
TV‐NVR408 TRENDnet User’s Guide 11. The Live View page will show up and begin streaming video. Logging‐in to the NVR for the First Time (OS X) 1. Open Safari on your computer. In the address bar, enter the IP address of the NVR 192.168.10.60. (If you have a DHCP server on your network, the IP address will be assigned dynamically.
TV‐NVR408 TRENDnet User’s Guide 3. The camera management page will detect if you installed the camera video streaming plug‐in or not. Click the link to download the plug‐in from the NVR. 4. Quit your browser completely by command‐Click on the browser icon and then click Quit before installing the plug‐in. 5. Go to the Finder and navigate to the Download folder. Command‐Click the WebComponents.pkg and then click Open.
TV‐NVR408 TRENDnet User’s Guide 6. Click Open to start installation. 7. Click Continue to install the plug‐in. 8. Select a destination to install the plug‐in. Then click Continue. 9. Use the default location and click Install. © Copyright 2018 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV‐NVR408 10. Enter your password and click Install Software 11. Installation will process automatically. 13. Open the browser and login again with the default IP 192.168.10.30 or the IP that was dynamically assigned by your router. 14. Enter the user name, admin, and the default password, admin, and then click OK. 12. Click Close to exit the installation. © Copyright 2018 TRENDnet. All Rights Reserved.
TV‐NVR408 TRENDnet User’s Guide 15. Click Trust (You’ll have to do this again when your camera changes to a new IP address.) 17. Enter the user name admin and new password again to start secured session. 18. The Live View page shows up and the video starts to stream. 16. The NVR will ask you to change your password from the default setting. Please enter the new password twice and click OK. The password must be between 8 and 16 characters. (Alphanumeric: a‐z, A‐Z, 0‐9, !, @, #, $).
TRENDnet User’s Guide TV‐NVR408 Basic Live View After you log‐in into the camera management page, you’ll see the Live View page. © Copyright 2018 TRENDnet. All Rights Reserved.
TV‐NVR408 TRENDnet User’s Guide Start/Stop Streaming Click this button to start or stop streaming. Select the display cell by click on it, (The yellow frame will wrap around the selected display cell.) then click on the icon of the stream you want. If the channel has been selected by others, stop that streaming before you change. Video Stream Click this button to choose the video stream between main stream and sub stream. 1: main stream; 2: sub stream.
TV‐NVR408 TRENDnet User’s Guide Playback Time Line You can playback the video recording one at a time at this page. You can also download the video clip and snapshots to your local computer. Select the video channel on the left hand side and then search for the video. There is a play back head in the center of the time line represented in a yellow vertical line. To look for a specific video recording, move the time line by clicking and dragging it.
TV‐NVR408 TRENDnet User’s Guide Slice images from video playback Download recorded videos You can take snapshots from playback video or make new video clips from the video you are playing back. To save complete video sections, you can download the files directly. Click this button to stop video playback streams. Click selected icon to open camera recording download page Click this button to take a snapshot of current playback. Click this button to start clipping a video from playback.
TV‐NVR408 TRENDnet User’s Guide Log System Information The log of the NVR is saving on the hard disk drive. You can search the relevant records and save to your local computer. System Information page shows the NVR’s basic information. Click System then click System Info to show the page. Search for logs Click the type of log and then the Start Time and End Time. Click Search to start searching. Basic Information Device Name: Human readable device name for easy identification.
TV‐NVR408 TRENDnet User’s Guide Logout Network Information Logout page allows user to log out the NVR web configuration page totally. Click OK to logout completely or Cancel to stay in the configuration page. IP Address: IP address of the NVR Subnet Mask: Network range of IP address Default Gateway: The default route going from the NVR subnet. Primary DNS: Primary DNS server address Secondary DNS: Secondary DNS server address © Copyright 2018 TRENDnet. All Rights Reserved.
TV‐NVR408 TRENDnet User’s Guide Advanced User Accounts System You can setup up to 16 user accounts to access the NVR’s video stream with a web browser or real time video stream (RTSP). Only one administrator account can be setup to configure the NVR and cannot be deleted. Device Settings Setup your system name for easy identification. This device name will also be recognized by other network camera software as the name of this camera.
TV‐NVR408 TRENDnet User’s Guide Time Settings The accuracy of the system clock is important for scheduling and accurate logging. You can synchronize the system time with your computer, or automatically check the time accuracy with a network time server (NTP server). Manual Time Sync Device Time: The system time of this camera. Automatic Update NTP Specify a time server (NTP server) to synchronize with. Server: (e.g. pool.ntp.org) Set Time: Click the calendar icon and manually select the date.
TV‐NVR408 TRENDnet User’s Guide Daylight Savings Live View Settings Setup daylight savings. Setup the live view video quality, file size and file saving directories. Automatic Update Enable DST: Check this box if your time zone has daylight savings. Start Time: Enter the date that daylight savings starts End Time: Enter the date that daylight savings ends DST Bias Enter how much time the daylight saving adjusted by daylight savings.
TV‐NVR408 TRENDnet User’s Guide your user name, under the subdirectory TRENDnet/PlaybackFiles. Click Browse and then choose a new destination if you want to save the file somewhere else. Record File Settings Record file size: This size of live view video recording. You can choose 256MB, 512MB, or 1GB a file. Smaller file size is good for many short recordings. Save record By default, files will be saved under the folder with files to: your user name, under the subdirectory TRENDnet/RecordFiles.
TV‐NVR408 TRENDnet User’s Guide Reboot Reboot: Click this button to reboot this camera. is a firmware upgrade available for your device, please check your TRENDnet model and version using the link. http://www.trendnet.com/downloads/ 1. Reset Reset: Reset all NVR settings, except the IP network settings and user information. Default: Load complete factory default to the camera. Import Config.
TV‐NVR408 TRENDnet User’s Guide Network TCP/IP Setup your basic IPv4 and IPv6 network settings on this page. Network Interface Duplex and Choose one of the Ethernet duplex and speed to Speed: match your network. Default: auto. MAC Address: Click this button to reboot this camera. MTU: Maximum transmission unit. The maximum field size in the Ethernet packet.
TV‐NVR408 TRENDnet User’s Guide Port DDNS You can change the service port numbers of NVR and enable/disable RTSP or HTTP services. Dynamic Domain Name Service, DDNS, allows you to find your camera from the Internet with an easy to remember domain name. Port Numbers HTTP Port: The default web access port. You can change the port number. However, you cannot disable the web service. The default port number is 80. RTSP Port: The Real‐Time Streaming Protocol port for video streaming.
TV‐NVR408 TRENDnet User’s Guide Video Virtual Host Virtual Host allows you to set virtual ports for each camera. Video Format Adjust the settings of video streams.
TV‐NVR408 TRENDnet User’s Guide Bitrate Type: Choose between variable bit rate and constant bit rate for video compression. The default is variable rate. On Screen Display Settings Display the camera name and the time the video. Select the video channel you want to change the setting, then change the settings. Move the red box to position the text. Click on Save to save the changes. Video Quality: Choose the video quality. The default is medium quality. Frame Rate: Choose the capturing frame rate.
TV‐NVR408 TRENDnet User’s Guide Text Overlay Privacy Mask Display extra information on the screen over the image. Move the red box to position the text. Click on Save to save the changes. Create a masking area to keep your privacy. You can create up to four independent masking areas by clicking and dragging on the screen. Channel: Select the video channel you want to edit. Check Box: Check this box to enable text overlay. Text Field: Enter the text you want to display.
TV‐NVR408 TRENDnet User’s Guide Video Recording Expire Time: Specify how many days you want to lock the recording. Click Save to save the changes Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. Channel: Select the video channel you want to edit. Enable Record Check this box and then click Save to enable video Schedule: recording. Pre‐record: Recording time before trigger event. Post‐record: Recording time after trigger event.
TV‐NVR408 TRENDnet User’s Guide Holiday Settings Edit Holiday Schedule Recording video in holidays may has different requirements. You can set up to 11 holidays of a year sharing the same holiday profile. Set up the holiday schedule by click on button. Holiday Name: Change the holiday name to meaningful name instead of index numbers. Enable: Enable or disable this holiday rule. Type: Select the holiday is for a day, a week or a month.
TV‐NVR408 TRENDnet User’s Guide Events Motion Detection Set up how the motion detection event will be triggered and what actions will be triggered. Note: This feature is camera dependent. Motion Save to save the choice. Detection: Draw Area: Click Draw Area button to start drawing. Click and drag on the area you want to set up the motion detection. The number of areas you can set up depends on camera models. Click Stop Drawing to stop drawing motion detection areas.
TV‐NVR408 TRENDnet User’s Guide Arming Schedule Linkage Method Edit: Click Edit to edit the recording schedule. The Edit Schedule window will pop up. 3. Select day of the week you want to edit. 4. Select All Day or Customized schedule of the day. 5. Set the time period and the event you want to trigger the video recording continuous (always recording) or motion detection. 6. Click Select All or the weekday you want to have the same schedule on different day. 7.
TV‐NVR408 TRENDnet User’s Guide Video Tampering Set up how the video tampering detection event will be triggered and what actions will be triggered. When video is suddenly blocked or blacken, tampered, the video tamper notifications will alert the system manager to check the camera. Note: This feature is camera dependent. Draw Area: Click Draw Area button to start drawing. Click and drag on the area you want to set up the tamper detection. Click Stop Drawing to stop drawing motion detection areas.
TV‐NVR408 TRENDnet User’s Guide 4. Click Select All or the weekday you want to have the same schedule on different day. 5. Click another day of the week by clicking on its tab to set the next schedule. Click OK when you have finished your settings. Exception Provide notifications for other system events, set up your notifications here. Linkage Method Notification Exception Type: First, choose the exception type, and then choose the corresponding action.
TV‐NVR408 TRENDnet User’s Guide Click Save to save the changes address as your incoming email server, maybe not. Please ask your email service provider for detail. Email Set up email accounts for notifications. SMTP Port: Service port number for outgoing email.* Authentication: Check this box if your server requires a password in order to send email. Most email servers require authentication when sending an email.
TV‐NVR408 TRENDnet User’s Guide Storage Settings Network Storage Storage Management Network Storage must be setup before it can be managed. You can add up to 8 network storages for your NVR. The recordings will subsequently be stored in these spaces. Save video from the first storage and then the next when the first one is full. Click on the entry to change the settings and click Save to save the settings.
TV‐NVR408 TRENDnet User’s Guide Appendix Turn on network discovery on Windows The NVR is UPnP enabled device. Find your camera is easy with Windows network discovery. If your network discovery is turned off, go to Control Panel >> Network and Internet >> Network and Sharing Center >> Advanced sharing settings and then select Turn on network discovery. Click Save changes to save the changes.
TV‐NVR408 TRENDnet User’s Guide You can visit the camera with the new preset password. (For more camera password management, please see Camera Connection Settings on page 22 for more details.) * TV‐IP430PI and TV‐IP450P cameras require 802.3at PoE+ power supply. TV‐ IP450PI camera require proprietary PoE power supply. Please supply the power separately instead of dragging power from the NVR. Dragging PoE power supply over the budget (35W) may cause the system breakdown.
TV‐NVR408 TRENDnet User’s Guide Regulations Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TEW‐821DAP TRENDnet User’s Guide Europe – EU Declaration of Conformity TRENDnet hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility. 2004/108/EF, 2006/95/EF og 2009/125/EF. Deutsch [German] Hiermit erklärt TRENDnet, dass sich das Gerät NVR in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 2004/108/EG, 2006/95/EG und 2009/125/EG befindet.
TRENDnet User’s Guide [Hungarian] alapvetõ követelményeknek és az 2004/108/EK, 2006/95/EK és a 2009/125/EK irányelv egyéb elõírásainak. Polski [Polish] Niniejszym TRENDnet oświadcza, że NVR jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi postanowieniami Dyrektywy 2004/108/WE, 2006/95/WE i 2009/125/WE. Português [Portuguese] TRENDnet declara que este NVR está conforme com os requisitos essenciais e outras disposições da Directiva2004/108/CE, 2006/95/CE e 2009/125/CE.
TEW‐821DAP TRENDnet User’s Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. NVR– 2 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
