User Manual

  

©Copyright2018TRENDnet.AllRightsReserved. 

42

TRENDnetUser’sGuide

TV‐NVR408
LiveView
Changetheliveviewsettings.

General
Liveviewgeneralsettings
VideoOutput
Interface:
ThevideooutputinterfaceisVGAorHDMI
LiveViewMode: ChoosethedefaultLiveViewmodetobe1x1single
videoonthescreenor2x2fourvideoonthescreenat
thesametime.Default:2x2.
DwellTime: Setuphowlongeachdisplaywillbeshoweduponthe
screen.There’snoeffecton2x2displaymode.On1x1
mode,eachvideowillbeshownonthescreenforDwell
Timeandthenchangetothenextvideo.Default:10
seconds.
EnableAudio
Output:
EnableordisableaudiooutputontheNVR.Default:
disabled
EventOutput: Definewherethevideoisgoingoutwhenevent
triggered.TheNVRissettobothVGAandHDMI.
FullScreen
Monitoring
DwellingTime:
Wheneventtriggeredfullscreendisplay,wholongthe
videoisgoingtostayonthescreen.Default:10
seconds.

ClickApplytoapplythechanges.
View
Settingliveviewdisplayarrangementandsequence.

LiveViewLayoutandSequenceSettings
VideoOutput
Interface:
ThevideooutputinterfaceisVGAorHDMI
CameraList: Installedcameraswillbelistedherebychannel.
LayoutPanel: Previewhowthelayoutthevideodisplay.
Camera
List
Control
Panel