1. Installation Package Contents = Power Cord (1.4m /5 1t) « Network Cable {1.8m / 6ft) «HDMI Cable (1.
2. Overview Audio In Network Port Camera Audio Grounding PoE ports Out point Power VGA cable (ot included) or HDMI cable Display Display {not included) (not included) 7 Note: The following installation steps support a stand alone setup WITHOUT a wired connection to a network. If it is desired to setup the NVR with a wired network connection (for remote access to NVR aver the internet, proceed to the User's Guide for the appropriate setup steps (do not continue with this quick setup).
2.1 Hard Drive Installation Note: « Static electricity can damage the Before handling the unit, discharge any static electricity, or use an anti-static wrist strap. « The supports DATA |, Il, and lll drives. 1. Remove the retaining screws from the the top panel of the / EEg 2, Slide the cover off the unit by pulling the top cover towards the rear panel.
3. Attach the DATA data and power cables to the hard disc drive, then connect the DATA cable and the mole connect or the control board. 4. Mount the hard drives to the drive bays of the using the 4 mounting screws, screwing from the underside of the into the hard drive case. = = = O@D@D C@C@O 0066 0.0.0.0.0.0.0.0 08000 000 o o o 00 06 000 000 ) OO 00 00 ©000.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0 Slide the top cover back on the and reinstall the screws holding the panel in place.
2.2 Hardware Installation 1. Connect an HDMI cable or a VGA cable (sold separately) from your display to the HDMI or VGA port on the rear panel. — VGA cable (included) | HDMI cable Display Display (not included) {not included) — — 2.
3. Attach the power cord (rear panel) and plug the unit into an electrical outlet. [ b © B25d 8. Bali 4. Gaggle the power switch located on the rear panel fo the On position. 5. Turn the power switch on, connect a Trend net PoE camera (i.e.
2.3 System Setup 1. If you are accessing the NVR the first time, please activate the device by following the password setup. S S admin For the next window saying “The device is now activated, would you like to export the password file for reset purpose in the future?” You can select Yes or No to proceed.
5. Unchecked “Start wizard when device starts?” to skip the setup process each time the TV-NVR408 is powered up (optional) then click “Next”. Configure network settings for the unit and click Next.
7. Configure port settings for the unit and click Next. Vi sl area 8. Configure and add cameras to the unit and click Next.
9. Select which hard drive you want to record to. (Initialize and format if necessary), then click “0K". Note: For further information about recording to a secondary hard drive, please refer to the User's Guide. e Capacity Status Property Type e 298.10GB Normal . 0TS 10. Add your cameras from your network and click “Next” gD Hag vt Recife e L Baal o o The hardware setup is complete and you will enter Live View. For detail information please refer to the User's Guide.
3. Start Recording 1. In Live View, use the mouse and right click anywhere on the screen. 2. A short menu will show up. Choose Start Recording and click Continuous Record. w6 Continuous Recording 3. Click Yes to confirm continuous recording. (For more advanced video recording features, please see the User's Guide for more details.
4. Instant Playback 1. In Live View, click (left button) on the display you want to playback. Please see the User's Guide for more advanced video playback features.
Declaration of Conformity TREND NET Manufacturer’s Name and Address Trend net, Inc. 20675 Manhattan Place Torrance, CA 90501 USA Sequestrate 156 2587 WB The Hague The Netherlands Product Information: Model Number: TV-NVR408 / TV-NVR416 Product Name: 8-Channel H.265 1080p HD Poet NVR 16-Channel H.265 1080p HD Poet NVR Trade Name: Trend net Trend net hereby declare that the product is in compliance with the essential requirements and other relevant provisions under our sole responsibility.
TREND NET Certifications This device can be expected to comply with Part 15 of the FCC Rules provided it is assembled in exact accordance with the instructions provided with this kit. Operation is subject to the following conditions: (1) This device may not cause harmful interference {2) This device must accept any interference received including interference that may cause undesired operation. Cce Waste electrical an electronic products must not be ! disposed of with household waste.