User's Manual

ManualsBrandsTRENDNET ManualsCamera & PhotoIR Network Camera

Table Of Contents

1 Appearance Description
- 1.1 Overview of Type I Bullet Camera
- 1.2 Overview of Type II Bullet Camera
  - 1.2.1 Micro SD Card Slot & Reset/ WPS Button
  - 1.2.2 PoE Power Supply Configuration (Optional)
2 Installation
- 2.1 Installation of the Bullet Camera
- 2.2 Installation of Water-proof Jacket
3 Setting the Network Camera over the LAN
4 Accessing via Web Browser

Network Bullet Camera·Quick Start Guide

14

14

Installing the SD Card

Insert the micro SD card into the micro SD card slot.

SD Card Slot

Install the SD Card Figure 1-4

Resetting the Camera

Press WPS/RESET about 10s when the camera is power on or

rebooting to restore the default settings, including the user name,

password, IP address, port No., etc.