TRENDnet User’s Guide TV-IP762IC 720P 雲端無線夜視網路攝影機 Wireless HD Day/Night Cloud Camera Cover Page
TRENDnet User’s Guide Contents Product Overview .............................................................................. 1 Package Contents ................................................................................................................ 1 Features................................................................................................................................1 Product Hardware Features.......................................................................................
TV-IP762IC TRENDnet User’s Guide Product Overview Features TV-IP762IC The Wireless Cloud Camera, model TV-IP762IC, transmits real-time video over the Internet. Wireless n technology provides unsurpassed wireless coverage and improved streaming video quality. Add this camera to your wireless network at the touch of a button with Wi-Fi Protected Setup (WPS). Record 1280 x 800 (VGA) video at up to 30 frames per second (fps).
TV-IP762IC TRENDnet User’s Guide Product Hardware Features Front Panel View Rear Panel View Power Port – Connect the included power adapter from your camera to an available power outlet. Line Out Port – Connect the line-out cable to any connecting device.
TV-IP762IC TRENDnet User’s Guide WPS Indicator – This LED indicator blinks orange when there is a connection/data link. Adjustable Knob – Use this to tilt and pan the camera Application Diagram IP NETWORK CAMERA SOLUTION © Copyright 2012 TRENDnet. All Rights Reserved.
TV-IP762IC TRENDnet User’s Guide Installation Option Description* WPS Connection Wired Connection An alternative method of connecting your camera to your network is by using WPS. WPS is a quick, simple and secure method of adding devices to a network. If you have a router which supports WPS follow the steps below, otherwise, please use the wired mode of setting up the camera. 1.
TV-IP762IC TRENDnet User’s Guide Image B (wired connection) TRENDnet Cloud Service Note: (Before starting this configuration segment, make sure you are connected to the internet and the camera is accessible to the web). 1. 2. Take a look for a similar URL to this (11223344.cam.trendnetcloud.com) at the label on the back of the camera. Connect the power cable to the camera. . 3. There are two methods to connect to the internet, wired and wireless.
TV-IP762IC TRENDnet User’s Guide Green Mode The Green Mode indicates the camera is connecting to media in a peer-to-peer fashion to the internet or local network. This mode doesn’t offer configuration and management options – only live streaming. The firewall settings limits live streaming for each user. Red Mode The Red Mode indicates the camera is connecting to the internet or local network through a firewall.
TRENDnet User’s Guide TV-IP762IC Refresh this screen continuously if you wish to view your camera’s live stream. © Copyright 2012 TRENDnet. All Rights Reserved.
TV-IP762IC TRENDnet User’s Guide Install the Camera Insert the included CD-ROM into your CD/DVD drive. The Install Wizard program will run automatically. Note: If the Install Wizard does not run, you may have autorun disabled on your machine. In this case, browse to the CD drive and run InstallWizard.exe to begin the installation wizard. Begin by selecting a language from the drop-down menu. Currently, the TV-IP762IC supports the following languages: English, French, German, Russian and Spanish.
TV-IP762IC TRENDnet User’s Guide c. 4. Connect camera to your network using a network cable. The basic connection type is “C”, using a network cable. Let’s begin the installation process using the network cable connection first. Click this radio button and click Next to continue, Back to go to the previous screen or Home to return to the Main Menu. 5. Follow the instructions in the next screen to Power up the Camera.
TV-IP762IC TRENDnet User’s Guide 7. The wizard searches the network for your camera. 9. 8. If you only have one camera on your network, the wizard will automatically select it (as shown below). Otherwise, if you have more than one camera, it provides several options from the list. The wizard provides the Model Number and MAC Address of the camera. If you do not see any of your camera(s) in the wizard, click Retry to scan for the camera again.
TV-IP762IC TRENDnet User’s Guide 12. The mobile option allows the user to download the TRENDnet CloudView App in either Apple or Google android format. To use this feature, the user must have a QR Scanner App on their mobile device. This is also available from the Apple App Store or Google’s Play store. Click Next to continue, or Home to go to the main menu. 11. The initial setup is complete. The main feature is the Cloud Access accessibility feature.
TV-IP762IC TRENDnet User’s Guide Configure Manual Wireless settings (without WPS) 2. Connect the network cable. Click Next to continue. 3. Please wait while the wizard searches for your camera. Under Network connection and initial setup method, read the instructional warning on router wireless settings. Provided you are familiar with these optional settings, select the method that best suits your needs otherwise select the easier method, Connect camera to your wireless network manually.
TV-IP762IC TRENDnet User’s Guide 4. 5. Once your camera has been detected, the wizard displays the Model number and MAC address. If you have more than one camera then select the one you want to activate. Click Next to continue. 6. Wait while the camera is configured with the new settings. 7. Once the wizard has found your Access Point, you will be prompted to enter an 8-16 bit password depending on your router configuration.
TRENDnet User’s Guide 8. The camera once again configures the settings. 9. Disconnect the cable from the camera and click Next to continue. TV-IP762IC The camera connects to the wireless router. Make sure your router has wireless activated. 10. The initial setup is complete. The main feature is the Cloud Access accessibility feature. Click the link(s) or icon below to create a shortcut on your desktop. Also, below the icon is a warning.
TV-IP762IC TRENDnet User’s Guide the server may be busy or under maintenance. Under these circumstances, click Retry later again. If there is no warning, click Next. When you click the link and it connects using a browser, IE will display a warning for you to install an add-on. Click the pop-up screen to install the add-on. Click Install to install the software. The technique is illustrated below: If the camera is not configured correctly, an error indicates that you aren’t connected to the cloud.
TRENDnet User’s Guide TV-IP762IC Use the links to access the camera or QR codes on your desired mobile device. Click Next to continue or Home to return to the main menu. Click Finish to exit the wizard and start using your TRENDnet camera. Please refer to the page 15 for mobile apps download through the QR code option. The third option available is: Connect camera to your wireless network using Wi-Fi Protected Setup (WPS) button. Select this option using the radio button and click Next. 11.
TV-IP762IC TRENDnet User’s Guide Then activate the WPS on the router and sync it with the WPS on the camera. See the illustrations on the screen. Click Next to continue once you have followed the hardware side. Change the password if necessary or keep the original. Click Next to continue. The wizard searches for the camera via WPS. The camera is being configured. Once detected, the model number and MAC address is detected. If the screen below doesn’t appear, click Retry.
TRENDnet User’s Guide TV-IP762IC A summary report displays the Cloud access link to TRENDnet . Click the icon to create a shortcut to the camera. The warning message at the bottom of the screen displays a failed connection to the Trendnet Cloud service. Click Next to continue. The camera setup is complete. Use your own QR code reader from either an iPhone or Android device to access the apps from the market. Click Finish to end the wizard. © Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide Connect to your TV-IP762IC with a Mobile App TRENDnet Cloud Services also offers mobile connectivity. Access the iPhone App by going to the Apple™ App Store and downloading “TRENDnet CloudView” App. Alternatively, if you are using the Google™ Android service, go to the Google Play™ Store and download the app from there. Currently, TRENDnet does not support Blackberry™ or the Windows™ App stores.
TV-IP762IC TRENDnet User’s Guide Click the install button and accept the license agreement. As the app downloads and installs, use the pull-down menu to see the status of the download. When you click the downloaded icon the app starts to load. Accept the license agreement from TRENDnet by clicking the arrow key. Enter your camera details and click Next. © Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide TV-IP762IC The app opens to the main interface. View the camera feed. Scan the QR Code using one of iOS’s QR Code apps. The app automatically creates an HTML link to the iTunes App Store. Link the link. Here is Apple iTunes version You are immediately directed to the iTunes App Store. Click the link to download. © Copyright 2012 TRENDnet. All Rights Reserved.
TV-IP762IC TRENDnet User’s Guide Configuration The Interface After completing the Setup Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your TV-IP762IC camera. Open a web browser such as Internet Explorer® and enter the IP address of your camera. To log in, use the Username “admin” and the Password created in the Setup Wizard. If you did not create a password, the default Password is admin.
TV-IP762IC TRENDnet User’s Guide Network Wizard This screen shows the six steps to setting up the TV-IP762IC. It guides you through LAN Settings, Internet Settings, DDNS Settings, Camera Name Settings, Time Settings, and the Setup is Complete. . This screen shows the Network Settings. The Network tab consists of Network, Wireless Setup, Dynamic DNS, Cloud Settings, and Cloud Status Settings.
TV-IP762IC TRENDnet User’s Guide Action Tools This screen shows the System and Firmware Upgrade Settings. This screen shows the Recording Settings, Video Clip Settings, Snapshot Settings, and SD Management Settings. Motion Detection This screen shows the Motion Detection Video Settings for Live Video. Advanced This screen shows the Device Info and Log results. © Copyright 2012 TRENDnet. All Rights Reserved.
TV-IP762IC TRENDnet User’s Guide Configuring Camera Settings Wizard LAN Settings: Setup IPv4 and IPv6 DHCP and IP static settings. The TV-IP762IC allows you to make configuration changes from anywhere by connecting to the camera using a standard web browser. To configure camera settings: 1. 2. 3. Login to the camera as described in the section Setup. Click SETUP. The Wizard screen appears. Click the menu on the left side of the screen. The System configuration screen is displayed.
TRENDnet User’s Guide TV-IP762IC Camera Settings Camera Name: This is the name used to identify your camera on your network. Enter a suitable name or leave it at default. DDNS Settings: Select a Username and Password for your PPPoE settings (if it applies). Time Settings Time Zone: Use the drop-down menu to select the region you are located in. Daylight Savings: Here you can adjust the time for .
TV-IP762IC TRENDnet User’s Guide Setup Complete This section gives a summary of the settings completed. Click Apply to have the settings accepted. The system restarts. System This tab displays all the administration settings.This includes, Admin settings, User settings, Authentication, and Device settings. . Admin Password Settings Enter the old password and create a new password. Retype the password again to confirm Characters must be between 8-16 characters. Click Save. © Copyright 2012 TRENDnet.
TV-IP762IC TRENDnet User’s Guide Add User Account Enter a Username for the new user, password and confirm the password. Click Add to add the user. Device Settings Change the Camera name and setup an OSD ID here. OSD is On-Screen Display. As the name suggests it displays information on screen. This records data for time and date capture. The LED light can also be configured to “OFF”, Power/Link or Flicker.
TV-IP762IC TRENDnet User’s Guide Set Date and Time Manually Use the checkbox to enable date and time settings. From the drop-down menu select the Year/Month/Day and Hour/Minute/Second. Alternatively, click the Copy Your Computer’s Time Settings. Click Apply to complete the setup. For IPv4 there is also a PPPoE. When you click the checkbox, the data field allows you to setup the PPPoE username, password, and password.
TV-IP762IC TRENDnet User’s Guide Configure the wireless parameters with a Network Name, Site Survey or Network Access Point, the Wireless Mode, Security Mode, and the encryption key. connect and disconnect. Using a Dynamic DNS service provider, you can connect to your camera no matter what your IP address. Enter the details of your dynamic DNS service provider here. Go to Camera’s DDNS Setting page, click the checkbox to activate the feature. Then select a DDNS provider from the list.
TV-IP762IC TRENDnet User’s Guide Cloud Status Day/Night Mode Click this link to display Cloud URL and status. Click Refresh to update the status. Select a day/night mode from the drop-down menu. These options are Auto, Manual IR, Always Day Mode, Always Night Mode, and Schedule. For Light Switching select the light composition from the drop-down list.
TV-IP762IC TRENDnet User’s Guide Action Recording Click the checkbox to enable this feature. Select the trigger recording action from the drop-down list. Select between Always, Motion, or Schedule. For the Recording type select between a Snapshot or Video. With Snapshot, select the radio button then select the interval period. Click Apply to complete the configuration.
TV-IP762IC TRENDnet User’s Guide Action Video Clip Click the checkbox to enable this feature. Select the trigger recording action from the drop-down list. Select between Always, Motion, or Schedule. For the Video Clip type select the source, File Format, Pre-event Recording time, the Maximum duration and select the Target. The Target can either be FTP or Email.
TV-IP762IC TRENDnet User’s Guide server. Alternatively, set the target as Email. With Email, enter the recipient email address, SMTP Mail Server, the port number (default is 25), enter the username, password, Sender’s email, interval (600 seconds is default), and SSL/TLS parameters from the drop-down list. Select from either SSL-TLS or STARTTLS. Click the Test button to test the data entered. Click Apply once the settings are acceptable.
TV-IP762IC TRENDnet User’s Guide Using the mouse, draw a framed table to select which viewing position is going to be used to monitor the motion on the camera. Tools System To Load From a Local Hard Drive click the Browse button to find the file on your local hard drive to load up to the camera. Click Load Configuration. Click the Restore To Factory Default to return the camera to factory defaults. Click the Reboot Device to reboot the camera.
TV-IP762IC TRENDnet User’s Guide Advanced Device Info The information provides all configured data on the camera. To view this data click Advanced, Device Info. How to Register Click the Register link. A new browser window will open and you will be prompted to register the device. Complete the details as requested. Advanced Log The camera log records the camera’s video activity. Click Clear to clear the log or click Download to save the log file to a PC © Copyright 2012 TRENDnet. All Rights Reserved.
TV-IP762IC TRENDnet User’s Guide How to setup/access the camera remotely You can either setup the Dynamic DNS connection via camera itself or your home router. An account from any of the listed DDNS providers is required prior to this operation. Configure DDNS on your Camera 1. Go to Camera’s DDNS Setting page, click Enable to activate the feature. Then select a DDNS provider from the list. 2. Enter your DDNS’s the Host Name, User Name and Password. 5. 3.
TV-IP762IC TRENDnet User’s Guide Then click Add to add the application. * Please refer to your router’s user’s manual for detail Virtual Server setting. Some router might use Port Forwarding or Special applications for this function. The setup steps should be very similar. 6. Open another web browser and enter your DDNS domain and camera’s port number. http://yourDomainName:PortNumber 7. Camera’s login page will appear. 2. Login to your router’s web configuration page. 3.
TV-IP762IC TRENDnet User’s Guide http://yourDomainName:PortNumber 7. The camera login page will appear. 5. Go to Virtual Server* section and create a new entry. Enable: Click Enable Name: Enter the application name (eg. Camera Name) Protocol: Select TCP Private Port: The HTTP port that you assign on your Camera. Public Port: The port used on remote side to access to your Camera. LAN Server: The local IP address of your Camera. Click Add to add the application.
TV-IP762IC TRENDnet User’s Guide Technical Specifications Power Output: 5V, 1A external power adapter TV-IP762IC Camera General Sensor: 1/4” CMOS Sensor Board Lens Focal Length: 4 mm F/No: 1.5 Minimum illumination: 1 lux Focus Depth: 20 cm ~ infinity View: Horizontal: 52° Vertical: 40° Diagonal: 65° Digital Zoom: 4x Audio Input: 100~240V 50/60Hz 0.2A Built-in omni-directional microphone Sensitivity: -42dB +/- 3dB (5 meters max.
TV-IP762IC TRENDnet User’s Guide Antenna Built-in 1.3 dBi antenna Data Rate 802.11b: up to 11 Mbps 802.11g: up to 54 Mbps Action: send alert email and/or upload to FTP real time snapshot Port Settings HTTP port: 80 (default) RTSP PORT 554 (default) Time Synchronize with NTP server or PC, or set time/date manually 802.11n: up to 150 Mbps Security 64/128-bit WEP, WPA/WPA2-PSK Output Power 802.11b: 17 dBm (typical) 802.11g: 14.5 dBm (typical) 802.11n: 14.5 dBm (typical) Receiving Sensitivity 802.
TV-IP762IC TRENDnet User’s Guide 4. Make sure that the Network Camera isn’t conflicting with any Web server you may have running on your network. The default router setting might be a possible reason. Check that the configuration of the router settings allow the Network Camera to be accessed outside your local LAN. White vertical lines appear on the image from the camera 5.
TV-IP762IC TRENDnet User’s Guide Federal Communication Commission Interference Statement EN 60950-1: 2006 +A11:2009 +A1: 2010 +A12: 2011 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TV-IP762IC TRENDnet User’s Guide Česky [Czech] TRENDnet tímto prohlašuje, že tento TV-IP762IC je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede TRENDnet erklærer herved, at følgende udstyr TVIP762IC overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
TRENDnet User’s Guide TV-IP762IC– 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty. If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit’s warranty continues from the original date of purchase.