User Manual

© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TV-IP762IC
30
Configure the wireless parameters with a Network Name, Site Survey or Network
Access Point, the Wireless Mode, Security Mode, and the encryption key.
 Network Name: The default is TRENDnet but you can change this name to
anything you want.
 ‘Site Survey: This is a drop-down of available Access Points. You can press the
Rescan button to search more devices.
 Wireless Mode: There are 2 types, Infrastructure and Ad-Hoc mode.
Infrastructure is a wireless connection using an access point as a transmission
point of all wireless devices. Ad-Hoc is a wireless connection used without an
access point, where your TV-IP762IC is directly connected to your PC. This is
done using the on-board wireless adapter on the TV- TV-IP762IC connected
to a wireless adapter on the PC.
 Security Mode: There are four options available – None, WEP, WPA-PSK, and
WPA2-PSK. For None, no “key” is required. WEP/WPA-PSK/WPA2-PSK all
require a key. Keys are usually obtained from the network administrator or use
one off the web.
 Dynamic DNS
The Dynamic DNS feature allows you to host a server (e.g. web server, FTP or Game
server) using a domain that you own with a dynamically assigned IP address. Many
ISPs assign IP addresses dynamically i.e. the IP address changes each time you
connect and disconnect. Using a Dynamic DNS service provider, you can connect to
your camera no matter what your IP address. Enter the details of your dynamic DNS
service provider here.
Go to Camera’s DDNS Setting page, click the checkbox to activate the feature. Then
select a DDNS provider from the list.
Enter your DDNS’s the Host Name, User Name and Password, Timeout (in hours)
and Status (this displays the current setting).
Cloud Settings
Click the radio button to Enable or Disable cloud server syncing. Click Apply when
ready.