User Guide

TV-IP612P/WN (Wireless N) Pan/Tilt/Zoom Internet Camera

Tools

Backup and Restore

Save to Local Hard Drive: To save the

configuration to a file clock on the Save

Configuration button.

Load From Local Hard Drive: If you need to load a

saved configuration file into the camera click the

Browse button and find and select the configuration

file to be loaded. Then click the Load Configuration

button to load the file which will apply the saved

settings once loaded.

Restore to Factory Defaults: To set the camera to the factory default settings click the Restore

Factory Defaults button.

Reboot Device: To restart the camera, click the Reboot Device button

Firmware Upgrade

Please check the TRENDnet Support webpage to check if any new firmware version is available

for your camera. The current firmware utilized by the camera is listed in the Firmware Upgrade

page in the Firmware Information section.

Firmware upgrade

Step 1. Once you have a new firmware version

available for upload click on the Browse button to

select the file from your files system.

Step 2. With the firmware file selected click on the

Upload button which will begin the firmware

upgrade.

Note: Do not turn off power to the camera while the firmware upgrade is in process.