TRENDnet User’s Guide Cover Page
TRENDnet User’s Guide Contents Product Overview ...........................................................................1 Package Contents .......................................................................................................... 1 Features ......................................................................................................................... 1 Product Hardware Features...........................................................................................
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Product Overview Features TV-IP672W The Megapixel Wireless N PTZ Internet Camera, provides security over a large area. Pan the camera side-to-side a remarkable 340 degrees and tilt up-and-down 115 degrees from any Internet connection. Wireless n technology provides unsurpassed wireless coverage and improved streaming video quality. Add this camera to your wireless network at the touch of a button with Wi-Fi Protected Setup (WPS).
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Product Hardware Features Front Panel View Rear Panel View Light Sensor IR LED Camera Lens Focus Ring Antenna WPS button LAN port Reset button Power port Line Out • • • • • • • Power/Link LED Privacy button Micro SD slot LAN Port – Connect Ethernet cables to your wired network devices. Power Port – Connect the included power adapter from your camera to an available power outlet. Note: Use only the adapter that came with your camera.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Installation Wired Connection 1. Connect the Ethernet Cable If you intend to use the network camera as a wired device, connect one end of the included Ethernet cable into the Ethernet port on the rear panel of the camera and connect the other end to an available port on your network. If you prefer to use the camera on a wireless network, see below for instructions on connecting the power adapter. 2.
TRENDnet User’s Guide TV-IP672W / TV-IP672WI Wall mount installation To attach the metal plates carry out the following: • • • • Remove the two rubber pads under the base of the Camera. Slide the metal plate onto the base of the camera, making sure that the two holes on the base of the camera align with the two screw holes on the base of the camera. Secure the metal plate to the base of the Camera with the two screws provided. The camera can now be mounted to the ceiling or a wall.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Starting the Setup Wizard 2. Connect an RJ-45 cable from a switch/router to the Ethernet port on the back of the camera and connect the AC power adapter to the camera. Click Next to proceed. 3. From the list of cameras that appears, select the camera you wish to configure and click Next to continue. If your camera is not listed, ensure that it is connected to both power and the network and click to re-scan the network for your camera.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide 4. Login to your camera by entering the ID and Password. By default, both the ID and Password are set to admin. Click Next to continue. 6. It is strongly recommended that you change your password to secure the camera from being accessed by others. Check the Change Password box and enter the new password in both password fields to confirm the new password. Click Next to continue. 5. Enter a name for the camera in the Camera Name field.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide 8. Select whether you want to use the camera over an wireless connection or on a wired connection. Click No, I don’t want to use wireless for the camera. Then click Next to continue. (skip to step 12 for wireless configuration) 10. After the Setup Wizard configures the camera, the wizard starts to setup process. 11. When the Setup Wizard has finished, the configuration is complete and the following screen appears: 9.
TRENDnet User’s Guide 12. When selecting the wireless setup choose “I want to use wireless for the camera, click Next to continue. Wireless Connection • • • Find the access point (AP) you wish to connect to from the Available AP drop down menu. In most cases you should leave the Channel set to Auto as the AP will determine the channel of operation. Select the type of authentication and encryption required by the access point and enter the Key required to connect. TV-IP672W / TV-IP672WI 13.
TRENDnet User’s Guide 15. Connecting over wireless Disconnect the Ethernet cable from the camera and wait for 1 minute for the camera to turn to wireless mode then click Next to continue. TV-IP672W / TV-IP672WI When the Setup Wizard has finished, the configuration is complete. If there is a wireless connection found, the following screen will appear: When the Setup Wizard has finished, the configuration is complete.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Configuration Main Interface After completing the Setup Wizard, you are ready to use your camera. The camera’s built-in Web configuration utility is designed to allow you to easily access and configure your TV-IP672W or TV-IP672WI camera. Open a web browser such as Internet Explorer® and enter the IP address of your camera. To log in, use the User name admin and the password you created in the Setup Wizard.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide 6. Pan This button pans the camera to the desired position from start to Pan. Record Start recording the current video stream. 7. Patrol This button functions from start to auto patrol. Storage Folder Select this icon to select the folder where you want to store video feeds. 8. Stop This button stops the Pan & Patrol motion. Audio Click this button to toggle between sound and mute. 9.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Setup Wizard To view the Setup Wizard settings: 1. 2. Login to the camera as described in the section Using the web-based configuration interface.Click on the Setup tab on the left panel. Click Wizard. The Welcome to Internet Connection Setup Wizard screen appears. Step 2: Internet Settings This screen provides PPPoE settings and allows the camera to be connected directly to your ADSL modem. Click the Enable checkbox to setup PPPoE.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Step 3: DDNS Settings Step 4: Camera Name Settings This screen provides DDNS settings. Click the Enable checkbox to setup DDNS. Once you have clicked Enable, select your DDNS Server and enter your Server Address. Enter a Host Name, User Name, and Password. Verify the password by entering your details again and then enter the Timeout settings in hours. Click Next to continue.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Step 5: Time Zone Settings Step 6: Setup Complete This screen provides Time Zone settings. From the Time Zone drop-down list, select your time zone. Click Enable Daylight Saving if you are going to use that time method and select either Auto Daylight Saving or Set date and time manually. Click Next to continue. This screen provides Configuration Settings. The final screen shows the information you have just configured.
TRENDnet User’s Guide System System is divided into two main sections – Admin and Time & Date. The Admin section is where all Device Management configurations are handled. TV-IP672W / TV-IP672WI Admin Password Settings: Here you can change the administrator password settings. Enter the Old Password, New Password, and Confirm New Password in their respective fields.Click Save to continue.
TRENDnet User’s Guide Authentication: Here you have three options to authenticate. RTSP Authentication, HTTP Authentication, and Snapshot. Click the checkbox to enable each authentication process or leave them blank. Click Save to continue. TV-IP672W / TV-IP672WI The next configurable section under System is Time and Date. If you didn’t set the time and date settings in the Setup Wizard, you can change them here.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Under Set Date and Time Manually, click the Setup Date and Time Manually checkbox if you wish to set the time by yourself. From the drop-down list on all settings, select your time and click Apply to continue or click Copy Your Computer’s Time Settings. Network This screen shows the LAN Settings. If you didn’t set your LAN settings in the Setup Wizard, you can set them up here. Under LAN Settings, select either DHCP Connection or Static IP Address.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Wireless Setup This screen shows the Wireless Settings. Click the Wireless checkbox to enable wireless. Complete the details in the fields according to your router. Enter a Network Name, under Site Survey select the SSID from the drop-down list or rescan your network settings. Select the Wireless Mode from the drop-down list (Infrastructure, Ad-Hoc mode). Select your Security Mode from the drop-down list. Select from WEP/WPAPSK/WPA2-PSK.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Dynamic DNS Also under Network Settings is Dynamic DNS. If you have not enabled this function in the Setup Wizard click the DDNS checkbox to enable Dynamic DDNS. Select your DDNS server from the drop-down list and fill in the parameters from these fields: Host Name, User Name, Password, Confirm Password, and Timeout. Click Apply to set these changes and continue.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Video and Audio Video Profile Two - Options: Under each profile settings there are six main functions, Encoder Type, Resolution, Frames per Second, Encode Method, bps, and RTSP URL settings. Encode Type: This sets the file format and file quality. Resolution: This is the size of your image.
TRENDnet User’s Guide TV-IP672W / TV-IP672WI Bps – 4Mbps/3Mbps/2Mbps/1.5Mbps/1Mbps/768Kbps/512Kbps/384Kbps/256Kbps/12 8Kbps/64Kbps RTSP URL – 3gpp Day/Night Mode The TV-IP672WI allows users to record data in day and night mode. The TV-IP672WI have LED’s for night mode. This section provides day and night options. You can select it to run automatically, manually, in constant day mode or constant night mode. Audio Setup The TV-IP672W/TV-IP672WI allows users to record and broadcast audio.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Action Recording This screen shows the SD Card parameters. You are able to set the recording options on this page. Click the Recording checkbox to enable camera recording. All data is stored on the removable SD card. Trigger By - Always This option allows you to record constantly. If you select Always bear in mind that the Recording Type should be Video and that the source usually comes from Profiles 1, 2 or 4 under Source.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide the camera will start recording before the allotted time schedule. These times can only be set in seconds. Click Apply to complete the configuration. Video Clip Click the Video Clip checkbox to activate video recording events. There are three main sections: Trigger By: Always, Motion, Schedule, Video Clip Type: Configure the recording options Recording Type Target: The targets available are FTP and E-mail.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide The Trigger by and Video Clip settings are similar to the options under Recording. Please see the above description for details. Target Target offers two variables, FTP or Email. You cannot select both. If you select FTP enter the details as laid out in the FTP field.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Snapshot These settings control SNAPSHOT settings for your camera. The Trigger by settings is similar to settings above, so please view the settings above. The Snapshot Type provides for a Single snapshot or 6 snapshots at 1-2 second intervals. The Target FTP and Email settings are similar to settings explained above. Please read the configuration in the above explanation. Preset Position Preset Position This screen shows the software Pan/Tilt functions.
TRENDnet User’s Guide TV-IP672W / TV-IP672WI The Pre-programmed Preset Positions is a list of presets you have setup under Preset Position. This list is populated with different camera views and angles. Patrol Selection This area is where you setup the movement of the Pan/Tilt during a particular time frame. This Patrol Position can be setup with different Pan/Patrol Speeds and Dwelling time(s) in seconds. The Dwelling Time is the duration the camera takes to span a particular area. 1.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide SD Management These settings control the management of data on the SD card installed on the camera. Set the files per page – 5-100 files. To delete a file, select the file and click the Delete checkbox to delete the file. If you wish to format your SC card at any time, click the Format SD Card button. Motion Detection These settings control the motion detection settings on the camera.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Tools Firmware Upgrade System These settings allow you to save the recorded data to your local hard drive or retrieve it from the drive. When you click the Save Configuration button it saves a database file to your local system.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Advanced Log These settings display the Current Log of the device. Click the Clear Device Info These settings display the Device information to you. It comprises of all the important details regarding the phones network settings. The description is laid out in the picture below. button to reset the log or click the Download file in txt format. button to download a For more monitoring features, please refer to SecurView Pro software user’s guide for details.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide How to setup/access the camera remotely You can either setup the Dynamic DNS connection via camera itself or your home router. An account from any of the listed DDNS providers is required prior to this operation. Configure DDNS on your Camera 1. Go to Camera’s DDNS Setting page; click Enable to activate the feature. Then select a DDNS provider from the list. 2. Enter your DDNS’s the Host Name, User Name and Password. 3.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Then click Add to add the application. * Please refer to your router’s user’s manual for detail Virtual Server setting. Some router might use Port Forwarding or Special applications for this function. The setup steps should be very similar. 6. Open another web browser and enter your DDNS domain and camera’s port number. http://yourDomainName:PortNumber 7. Camera’s login page will appear. Configure DDNS on your router 1.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide http://yourDomainName:PortNumber 6. 4. The camera login page will appear. Go to Virtual Server* section and create a new entry. Enable: Click Enable Name: Enter the application name (eg. Camera Name) Protocol: Select TCP Private Port: The HTTP port that you assign on your Camera. Public Port: The port used on remote side to access to your Camera. LAN Server: The local IP address of your Camera. Click Add to add the application.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Technical Specifications Power Consumption Max. 10.5 watts TV-IP672W Power Input: 100~240V, 50/60Hz 0.5A Output: 12V, 1.25A external power adapter Camera General Dimension 113 x 113 x 130 mm (4.5 x 4.5 x 5.1 in.) Board Lens Weight 503 g (1.1 lb.) Focal Length: 4mm Temperature Operating: 0°C ~ 40°C (32°F ~ 104°F) Sensor: 1/4” CMOS Sensor F/No: 1.5 Minimum illumination: 1 lux Focus Depth: 20 cm ~ infinity View: Humidity Max.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Antenna 1 x detachable 2dBi dipole antenna (Reverse-SMA connector) Date Rate 802.11b: up to 11Mbps - 802.11g: up to 54Mbps Profile 4: H.264/MPEG-4 802.11n: up to 150Mbps Security 64/128-bit WEP, WPA/WPA2-PSK Output Power 802.11b: 17dBm (typical) 802.11g: 15dBm (typical) 3GPP Channels 802.11b: -88dBm at 11Mbps 802.11g: -74dBm at 54Mbps 802.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Digital Zoom: 4x Audio Management Interface Internet Explorer 7.0 or above Built-in omni-directional microphone Sensitivity: -40dB +/- 3dB (5 meters max.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Channels Management System Recording type: event based (motion detection), continuous, and scheduled 1~11 (FCC), 1~13(ETSI) Web based administration NIPCA support Access Up to 20 user accounts Backup / Restore Save/retrieve configuration files Log System log up to 500 entries Micro SD View, download, delete files Event Action Trigger event: motion detection Action: send real-time snapshot or video recording to FTP or email Port Settings HTTP port:
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Troubleshooting 1. The Power LED and Ethernet Activity LED do not light up. The power supply or camera might be faulty. Check that the connection to both the power source and the terminal on the back of the camera are secure and that you are using the provided power supply. If the camera is otherwise functioning correctly, the LEDs might have been disabled in the configuration. See the section of this guide on Configuration of System settings. 2.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide Federal Communication Commission Interference Statement EN 60950-1: 2006 +A11:2009 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
TV-IP672W / TV-IP672WI TRENDnet User’s Guide saistītajiem noteikumiem. Česky [Czech] TRENDnet tímto prohlašuje, že tento TV-IP672W / TV-IP672WI je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede TRENDnet erklærer herved, at følgende udstyr TVTV-IP672W / TV-IP672WI overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
TRENDnet User’s Guide Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. TV-IP672W / TV-IP672WI – 3 Years Warranty AC/DC Power Adapter, Cooling Fan, and Power Supply carry 1 year warranty.
