9. 10. 1 SAFETY PRECAUTIONS 'WARNING-INSTALLATION SHOULD BE PERFORMED BY A QUALIFIED ELECTRICIAN To ensure the success of the installation, be sure to read the instructions and review the diagrams thoroughly before beginning. All electrical connections must be in accordance with local codes, ordinances or National Electrical Code. If you are unfamiliar with methods of installing electrical wiring secure the services of a qualified electrician.
Installing motor housing and blade set 1. Align the blade with the iron plate from the motor( see fig. 1). Tighten the screws with the blade set. 2. Remove four screws from the side of motor housing; put the assembled fan with screws. (see fig. 2) Putting Your Fan Together 1. Remove the two set screws from the motor coupling. Remove the hairpin clip & wash from the clevis pin and remove clevis pin from down rod. 2. Insert the down rod through the center opening in the canopy .
2. Carefully lift the fan and seat the down rod and ball assembly on the hanger bracket. Be sure the groove in the ball is lined up with tab on the hanger bracket. Do not pinch wires between the ball and down rod assembly and hanger bracket (sec fig.5 & 6) 3. Install the safety cable into the building structure. (see fig.7) Wiring Your Ceiling Fan Caution : To avoid possible electrical shock, be sure electricity is turned off at the main fuse box before wiring. 1.
. Loosen the two canopy mounting screws from the hanger bracket. Mount the canopy on the two screws in the hanger bracket and twist the canopy, so the screw heads hold the canopy in place. Re tighten the two screws. (see fig.
Operation in Summer In warm weather, the reverse switch should be set to produce a downward flow of air. The constant, gentle breeze will transfer heat from your body; thus, you will feel cooler even if the temperature remains unchanged. This cooling effect is referred to as a wind-chill factor. In an air conditioned home, the wind-chill factor will allow you to set the thermostat higher than the usual setting. While using less energy to air-condition your home, you will stay just as cool.