Installation Instructions

bracket.
bracket
Mounting bracket (B) contains several pairs of threaded holes. Find the pair of holes that match the spacing of the holes on the junction box and on
your fixture’s backplate. Two of mounting screws (A) should be attached to mounting bracket (B). You may need to tighten the nuts that hold these
screws in place. Pull the house wires through the center of mounting bracket (B). Place mounting bracket (B) over the junction box so that mounting
screws (A) are aligned with the hole locations on fixture’s backplate (F). Secure mounting bracket (B) to the junction box by securely tightening the
mounting screws (D).
Place the fixture’s backplate (F) over mounting screws (A) so that they protrude through the holes on the backplate. Twist deco nuts (G) onto
mounting screws (A). Make sure the backplate of the fixture is snug against the wall. Install light bulb (not included) in accordance with the fixture’s
specifications. Do not exceed the recommended maximum wattage.