Installation & Assembly

ASSEMBLY INSTRUCTIONS:
1. Carefully unpack and lay out the parts
as shown in illustration.
2. Screw the pole (B) and (C), syphon (D)
tightly into the base (A) in turn.
3. Please keep the syphon (D) and base (A)
in same direction. If not, you should
unscrew the nut (H) under base (A) with
tool (I)and adjust base (A), then screw
nut (H) tightly as the sketch (J).
4. Place the shade (not included) into the
cup of syphon part, and then screw them
by screws (F) and nuts (G).
Your lamp now is ready to enjoy
IMPORTANT SAFETY INSTRUCTIONS:
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER)
AS A SAFETY FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT
IN A POLARIZED OUTLET ONLY ONE WAY. IF IT DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG. IF IT STILL DOES NOT FIT, CONTACT A QUALIFIED ELECTRICIAN.
NEVER USE WITH AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY AND EASILY
INSERTED. DO NOT ATTEMPT TO ALTER THE PLUG.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Use 3-way150 Wattage (Maximum)
type A bulb (Bulb not included)