Instructions / Assembly

ASSEMBLY INSTRUCTIONS

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with

package contents list and diagram above. If any part is missing or damaged, do not attempt to

assemble, install or operate the product. Contact customer service for replacement parts.

Estimated Assembly Time: 60 Minutes

Tools Required for Assembly (not included): Phillips head screwdriver, scissors and utility knife

SAFETY INFORMATION

WARNING

• Before assembly, carefully use scissors or utility knife to cut and unwrap all parts.

Make sure you do not discard the hardware.

CAUTION

• Use care in assembling your new kitchen cart. Take your time and use the

hardware provided and a quality Phillips head screwdriver. Never overtighten bolts.

• Do not sit on any part of the kitchen cart.

• All panels are labeled left and right as viewed from the front of unit.

Fig. 1

1. Insert wood dowels (CC) into the holes in the Base

(A) and insert Nut (NN) into the bottom of panels

(E,F,Q,L). Push the Left / Right side panels (E,F),

Left/Right center panels (L, Q) snug to the Base as

shown in diagram. Screw Hex screw (AA) into Flat

Washer (BB) with Allen Key (DD) through the base

to connect them, make sure them screw in the nuts.

Hardware Used

Hex screw x 8

Flat Washer x 8

Wood Dowel ø8

Allen Key

Nut

x 8

x 1

x 8