Instructions / Assembly

Fig. 5

5. Choose desired height of Interior wood shelves (H)

and place the Shelf Pins (HH) into same height shelf

holes inside side panels. Insert Wood Shelves (H),

allow Wood Shelves (H) to rest on the Shelf Pin

(HH), use Screws (LL) to ﬁ x the shelves.

Hardware Used

Shelf Pin

Screw

x 8

6. Locate Right Doors (C) and Left Doors (B),

attach the hinge another part to the side panels with

screws (Diagram 1). Slide door hinge keyhole into

panel hinge bracket. Use Phillips Head Screwdriver

to tighten screws. (Diagram 2)

TO ADJUST HINGES

To adjust door forward or backward change

keyhole slot position. (As Shown In Diagram 2a)

To adjust door right or left loosen/tighten screw.

(As Shown In Diagram 2b)

To adjust door up or down adjust bracket height.

(As Shown In Diagram 2c)

Attach the Knob (FF) to the Left Doors (B) and Right

Doors (C) and upper drawers, use the bolts attached

through the pre-drilled holes in the doors. Then use

a Phillips Head Screwdriver to tighten the bolts.

Hardware Used

Knob (with bolt) x 8

Fig. 6

Fig. 7

Hardware Used

x 14

x 2

7. Install the sliding frames with the panels (R,V,U,S),

insert the wood dowels (PP) on the holes and

connect the four panels together with screws (QQ).

Screw

Wood Dowel ø6

Screw x 32