Instructions / Assembly

6
Fig. 6
Fig. 5
D
A
A
KK
HH
JJ
II
Hardware Used
II
JJ
KK
HH
x 1
x 1
x 1
x 1
Anchor
Connection iron
Tipping Restraint
Screw
5. Lift Top Glass Panel (D) gently onto the Cushion
(EE) and allow the Glass Panel (D) to rest on the
Cushion (EE).
Insert Lower Glass Panels (A) , allow Lower Glass
Panels (A) gently to rest on the PAD (CC).
6. Decide on the location of the cabinet. Drill one hole
into wall with power drill, Push Anchors (JJ) into
wall holes. Using a Phillips screwdriver, turn screws
(HH) with Connection iron (II) into Anchors (JJ).
We have included one Tipping Restraint (KK) for this
unit. You must connect this one to prevent accidents
or injuries. When properly connected, this Tipping
Restraint (KK) can provide protection against
unexpected tipping of the Unit due to small tremors,
bumps or climbing. We strongly recommend
mounting this Tipping Restraint (KK) to a wall stud
and your Unit.
Warning: You must connect the Anti-rewind to help
prevent any accidents or damage to the
unit.
TO PREVENT TIP OVER
PRODUCT MUST BE
ATTACHED TO WALL