Assembly Instruction Packet For: TXC71 and TXC47 Sort Boxes Items are shipped in multible boxes Sections needed for SOFA Sections needed for LOVESEAT box - TXC23R box - TXC23C box - TXC23L box - TXC23R box - TXC23L TXC71 TXC47 page 1 10/29/2010
Sofa Assembly 1 Layout Parts Backs Back Cushion Qty 3 Seat supports Seats Seat Cushion Qty 3 Back rails Sideframes Center legs back legs 2 Layout Hardware note: you will need hardware pack from TXC23C box course thread 3" Chair Screw Qty 20 front legs 3 Tools Needed 4mm Hex Key - included 4mm Hex Bit for screw gun - included Phillips head screwdriver Capnut Qty 6 fine thread 1 1/2" Chair bolt Qty 2 fine thread 3 1/4" Chair bolt Qty 4 page 2
Sofa Assembly note: use course thread on 1,2,3,4,5 3 1 Repeat until all three seats and backs are assembled 2 Attach Seat support using (2) 3” chair screws Attach Back to Seat using (2) 3” chair screws 4 Attach Sideframe and Back rail using (4) 3" chair screws Left Sideframe and Back rail to Seat L L → 5 Attach Sideframe and Back rail using (4) 3" chair screws Right Sideframe and Back rail to Seat R R → page 3
Sofa Assembly note: use fine thread bolts for 7, 8, 9 6 Fit all sections together with Center legs → 7 Attach small center legs with (2) 3 1/4" chair bolts and (2) capnuts 8 Attach Rails to Back legs using (2) 1 1/2" chair bolts and capnuts 10 9 Attach Seats to Back legs using (2) 3 1/4" chair bolts and capnuts Put cushions on sofa Your sofa is assembled! page 4
Loveseat Assembly 1 Layout Parts Back Cushion Qty 2 Backs Seat supports Seat Cushion Qty 2 Seats Back rails L R Sideframes Center legs back leg front leg 3 2 Layout Hardware course thread 3" Chair Screw Qty 16 Tools Needed 4mm Hex Key - included 4mm Hex Bit for screw gun - included Phillips head screwdriver Capnut Qty 3 fine thread 1 1/2" Chair bolt Qty 1 fine thread 3 1/4" Chair bolt Qty 2 page 5
Loveseat Assembly 3 note: use course thread on 1,2,3,4,5 1 Repeat until both seats and backs are assembled 2 Attach Seat support using (2) 3” chair screws Attach Back to Seat using (2) 3” chair screws 4 Attach Sideframe and Back rail using (4) 3" chair screws Left Sideframe and Back rail to Seat L → L Attach Sideframe and Back rail using (4) 3" chair screws 5 Right Sideframe and Back rail to Seat R R → page 6
Loveseat Assembly note: use fine thread bolts for 7, 8, 9 6 Fit all sections together with Center legs → 7 Attach small Center leg with (1) 3 1/4" chair bolt and (1) capnut 8 Attach Rails to Back leg using (1) 1 1/2" chair bolt and capnut 10 9 Put cushions on loveseat Your loveseat is assembled! Attach Seats to Back leg using (1) 3 1/4" chair bolt and capnut page 7
TREX OUTDOOR FURNITURE WARRANTY Poly-Wood, Inc.
