Installation Guide

BRACE
SHORT
LONG BRACE
15 1/8"
16 1/4"
ANGLE CUT WITH LONG EDGE ON THE
BOTTOM ATTACHES TO THE BACK LEG
TOOLS NEEDED
DescriptionQty.
6/2/2011
4mm Hex Key (included)
__(1) Back leg assembly
using (4) 3" screws
Model: TXD102
Assembly Instructions
__(1) Foot rest
Step 2
Attach back leg assembly to seat assembly
Step 1
Attach front assembly to the seat
__(1) Hardware pack
ALL HARDWARE IS COATED STAINLESS STEEL
__(2) Long brace (LH/RH)
__(2) Short brace (LH/RH)
assembly and with (4) 3" screws
__(1) Seat assembly
__(1) Front assembly
Step 3
Attach braces between the front and back
legs with the remaining (8) 3" screws.
Note: Angle cut on brace
should be attached to the back leg
B - 14 X 3 SOCKET WAFER "B"
16