Installation Guide

B - 14 X 3 SOCKET WAFER "B"
20
12° COMPOUND ANGLE CUT WITH
LONG EDGE ON THE BOTTOM
ATTACHES TO THE BACK LEG
*NOTE BRACES ARE ALSO RH AND LH*
15 1/8"
16 1/4"
12° ANGLE CUT
Description
Assembly Instructions
Qty.
__(1) Seat assembly
Model: TXD202
using (4) 3" screws
using (2) 2
TOOLS NEEDED
__(1) Hardware pack
Attach back leg assembly to seat assembly
4mm Hex Key (included)
" screws
__(2) Front leg with arm (LH/RH)
__(1) Back leg assembly
½
ALL HARDWARE IS COATED STAINLESS STEEL
__(2) Long brace(LH/RH)
__(2) Short brace (LH/RH)
and footrest with (8) 3" screws
Attach legs to the seat assembly
Step 1
__(1) Foot rest
Step 2
Attach arms to back leg assembly
Step 3
Attach braces between the front and back
legs with the remaining (8) 3" screws.
Note: Compound angle cut on brace
should be attached to the back leg
6/2/2011
A - 14 X 2-1/2 SOCKET WAFER "B"
2
B
A
A
BRACE
SHORT
LONG BRACE