Installation Guide

ALL HARDWARE IS STAINLESS STEEL
DescriptionQty.
6/2/2011
Model: TXRST18
Assembly Instructions
4mm Hex Key (Included)
the table top.
Place the leg assemblies together on
Step 1
in pre-drillled holes.
1
Attach the legs using (4) 14x2 Screws
Connect the braces using (1) 8x1¼ Screw.
Step 3
TOOLS NEEDED
Phillips head screwdriver
Step 2
__(1) Table top
__(1) Bottom leg assembly
__(1) Top leg assembly
4
B - 8 X 1-1/4 PHIL FLAT SCREW
Bottom Legs
Top legs
A - 14 X 2 SOCKET WAFER "B"