MSDS

Bamberger Polymers Inc. Phone: [phone]
11550 Fuqua, Suite 205 Fax: [phone]
Houston, TX 77034 Email: [e-mail]
MATERIAL SAFETY DATA SHEET
LOW DENSITY POLYETHYLENE
1. PRODUCT NAME
Trade Name: Low Density Polyethylene Bapolene 1062
Chemical Name: Plastic Plastics, Ethylene/Olefin Copolymer Plastics
CAS Number: 9002-88-4
Substances listed in the Ingredients Section are those identified as being present at a concentration of 1% greater, or 0.1% if the
substance is on the list of potential carcinogens cited in the OSH Hazard Communication Standard. Where proprietary ingredient
shows, the identity of this substance may be made available as provided in 29 CFR 1910.1200(1).
2. PHYSICAL DATA
Boiling Point: Not applicable
Vap. Press: Not applicable
Vap. Density: Not applicable
Sol. In Water: Not applicable
Sp. Gravity: 0.910-0.970
Appearance: Translucent white, solid pellets or granules
Odor: No odor
3. FIRE AND EXPLOSION HAZARD DATA
Flash Point: Not applicable
Method Used: Not applicable
Flammable Limits
LFL: Not applicable
UFL: Not applicable
Extinguishing Media: Water fog, foam, alcohol foam, CO
2
, dry chemical.
Fire and Explosion Hazards: Dense smoke emited when burned without sufficient oxygen.
Fire-Fighting Equipment: Wear positive pressure, self-contained breathing apparatus in any closed space.
4. REACTIVITY DATA
Stability: (conditions to avoid) Temperatures of 572⁰F, 300⁰C will release combustible gases.
Incompatibility: (Specific materials to avoid) None.
Hazardous Decomposition Products: Combustible gases when exposed to temperatures over 572⁰F, 300⁰C.
Hazardous Polymerization: Will not occur.