MSDS

5. ENVIRONMENTAL AND DISPOSAL INFORMATION
Action To Take For Spills/Leaks: Sweep up and discard
Disposal Method: Bury in landfill or burn in an adequate incinerator in accordance with applicable local, state, and federal
regulations.
6. HEALTH AND HAZARD DATA
Eye: Solid or dust may cause irritation or corneal injury due to mechanical action.
Skin Contact: Essential nonirritating to skin. Mechanical injury only.
Skin Absorption: A single prolonged skin exposure is not likely to result in the material being absorbed through skin in harmful
amounts.
Ingestion: May cause chocking if swallowed. Single dose oral toxicity is believed to be very low. Considered physiologically inert.
Inhalation: Vapors are unlikely due to physical properties. Single exposure to dust is not likely to be hazardous.
Systemic & Other Effects: No relevant information found.
7. FIRST AID
Eyes: Irrigate immediately with water for at least 5 minutes. Mechanical irritation only.
Skin: Wash off in flowing water or shower
Ingestion: No adverse effects anticipated by this route of exposure incidental to proper industrial handling.
Inhalation: No adverse effects anticipated by this route of exposure incidental to proper industrial handling.
8. HANDLING PRECAUTIONS
Exposure Guidelines: Non established
Ventilation: Good general ventilation should be sufficient
Respiratory Protection: No respiratory protection should be needed
Skin Protection: No precautions other than clean body-covering, clothing should be needed
Eye Protection: Use safety glasses
9. ADDITIONAL INFORMATION
Special Precautions To Be Taken In Handling And Storage: Practice reasonable care and caution in handling.
To best of our knowledge the information included in this Material Safety Data Sheet is accurate. However, Bamberger Polymers, Inc does not make any
warranty, express or implied, or access any liability in connection with this information or use.