Installation Guide

REMOVE TAPE BACKING AND PLACE DOWNSPOUTS INTO THE JOIST BAY

4. DOWNSPOUTS

» Remove the backing on the double-sided tape and

place the downspout in the joist bay.

» Repeat the process the same as you would in a stan-

dard Trex RainEscape installation.

5. TROUGHS

Remove the backing on the double-sided tape on

one side of the joist and place the ﬁrst side of the

trough as you would in a standard installation.

Place new strips of the Trex RainEscape

double- sided tape along the top of the

adjoining trough and install as you would in

a standard installation. (5A)

In order to keep the trough from getting too bulky,

stagger the placement for the second row of tape

so as not to position it on top of the tape below.

REMOVE TAPE BACKING AND PLACE THE TROUGH

IN THE JOIST BAY AS YOU WOULD IN A

STANDARD INSTALLATION

ADD NEW TAPE TO THE TOP OF THE

INSTALLED TROUGH AND PLACE

SECOND TROUGH. REPEAT THE PROCESS

FOR ALL REMAINING TROUGHS

SEALING THE SYSTEM

Tape the ﬁnished system with 4" Trex RainEscape

Tape as you would for a standard installation.

STAGGER TAPE

PLACEMENT FROM

TROUGH TO TROUGH

ELEVATIONS SYSTEM