Instructions / Assembly

License Agreement with Trex Company, Inc. RainEscape® is a federally registered trademark of Dri-Deck Enterprises, LLC.

This installation guide provides basic instructions on how to install Trex RainEscape Sot

Lighting. Please read through these instructions carefully. For additional information on how to install

Trex RainEscape Sot Lighting, please call a Trex RainEscape Specialist at 1-877-348-1385.

For additional information on how to install Trex RainEscape Sot Lighting,

please call a Trex RainEscape Specialist at

1-877-348-1385.

INSTALLATION GUIDE

SOFFIT LIGHT

NOTES

PAGE 1
NOTES SOFFIT LIGHT I N S TA L L AT I O N G U I D E For additional information on how to install Trex RainEscape Soffit Lighting, please call a Trex RainEscape Specialist at 1-877-348-1385. © 2020 Trex Company, Inc. All rights reserved. Trex® RainEscape® products are manufactured and sold by Dri-Deck Enterprises, LLC under a Trademark License Agreement with Trex Company, Inc. RainEscape® is a federally registered trademark of Dri-Deck Enterprises, LLC.
PAGE 2
6" (15.2 cm) 6" (15.2 cm I N S TA L L AT I O N G U I D E SOFFIT LIGHT H OW TO I NSTA LL TR E X SO FFI T LI GHTI NG TOOLS NEEDED PLANNING NOTE: When designing your deck, plan locations of lights, power supply, timer, and dimmer. These should be accessible for service. Installing a GFCI outlet is REQUIRED to help prevent damage to lighting from electrical surges. JIG SAW 4-5/8" (120 mm) HOLE SAW LIGHTING LAYOUT 2. Dimmer should be installed in a dry location.