Instructions / Assembly

13 | P a g e
7. EXPOSURE CONTROLS & PERSONAL PROTECTION RECOMMENDATIONS
Eye Protection
Wear safety glasses during sheet cutting or fabricating process.
Skin Protection
Wear gloves when cutting or fabricating sheets by hand
Respiratory
Protection
Fire fighter should wear NIOSH approved self-contained breathing
apparatus (SCBA) during fire emergency
Engineering Control
Ventilation Requirement:
□Local Exhaust
□Specific
▣ General
Required
Work/Hygiene
Procedure
Do not eat, drink or smoke in work area. Wash hands thoroughly after
handling especially before eating, drinking, smoking, chewing gum, or
using restroom facility
Exposure Guidelines
No.
P
Components
PVC Sheet
OSHA-PEL
n/a
ACGIH-TLV
n/a
8. ACCIDENTAL RELEASE CONTROL MEASURES
Response to Spills
N/A
9. HANDLING AND STORAGE
Handling
Use with care. Wear gloves if necessary when cutting or fabricating
sheet.
Storage
Store in a cool dry, well-ventilated area away from sources of extreme
hear or fire.
Note: Electrical buildup is possible
Container Use
N/A
10. STABILITY AND REACTIVITY
Stability
Stable
Conditions to Avoid
Fire or extreme heat
Hazardous Decomposition
If burned, it will generate carbon dioxide, carbon monoxide, HC1.
Hazardous Polymerization
Will not occur
11. DISPOSAL CONSIDERATIONS
Disposal Method
It must be disposed of in accordance with Federal, State and local
environmental control regulations.
Recycle/Reclaim
Recycling of PVC sheet should be encouraged where possible