Instructions / Assembly

10 | P a g e
TECHNICAL SPECIFICATIONS: Foam
I. TYPICAL PROPERTIES
PROPERTY
TEST METHOD
UNIT
VALUE
PHYSICAL
Specific Gravity
Water Absorption
Shore D Hardness
ASTM D 792
ASTM D 570
ASTM D 2240
g/cm^3
%
__
0.75
.30
52
MECHANICAL
Tensile Strength at Yield
Elongation at Break
Flexural Modulus
Impact Strength(Charpy Unnotched)
Dielectric Strength
ASTM D 638
ASTM D 638
ASTM D 790
ASTM D 256
ASTM D 149
psi
.%
Psi
ft lb/in^2
kv/mm
3,000
15
130,000
7
12
THERMAL
Heat Distoration Temperature
(under load at 264 psi)
Coefficient of Linear Expansion
Thermal Conductivity
ASTM D 648
ASTM D 696
ASTM D 177
°F
In/in/°F
Btu in/hr ft^2 °F
140
35 x 10^-6
0.50
II. FLAMMABILITY STANDARDS
OTHER PROPERTY
RATING
THERMAL
UL 94
UL 94
UL 48
V0
5V
N/A
Passed
Passed
Passed
III. AVAILABILITY
STANDARD
CUSTOM
SIZE
4ft x 8ft (48” x 96”)
Available upon request
COLORS
1/8” (3mm) & ¼” (6mm)
White, Black, Beige, Dark
Gray, Light Gray, Red, Dark
Yellow, Dark Blue, Green
Available upon request
GAUGES
In millimeters
1 through 6, 10 & 12.7
Available upon request
The information contained herein is true and accurate to the best of our knowledge. All recommendations and
suggestions are made with guarantees. This information is to be used by individuals with technical skill at their
own discretion and risk.