User Manual

TRex 95 / 113
board_id: MT_2150110033
phys_port_cnt: 1
Device ports:
port: 1
state: PORT_DOWN (1)
max_mtu: 4096 (5)
active_mtu: 1024 (3)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
link_layer: Ethernet
hca_id: mlx5_0
transport: InfiniBand (0)
fw_ver: 12.17.1010
node_guid: 248a:0703:0014:fc60
sys_image_guid: 248a:0703:0014:fc60
vendor_id: 0x02c9
vendor_part_id: 4115
hw_ver: 0x0
board_id: MT_2150110033
phys_port_cnt: 1
Device ports:
port: 1
state: PORT_DOWN (1)
max_mtu: 4096 (5)
active_mtu: 1024 (3)
sm_lid: 0
port_lid: 0
port_lmc: 0x00
link_layer: Ethernet
ibdev2netdev
[bash]>ibdev2netdev
mlx5_0 port 1 ==> eth6 (Down)
mlx5_1 port 1 ==> eth7 (Down)
find the ports
[bash]>sudo ./dpdk_setup_ports.py -t
+----+------+---------++---------------------------------------------
| ID | NUMA | PCI || Name | Driver |
+====+======+=========++===============================+===========+=
| 0 | 0 | 06:00.0 || VIC Ethernet NIC | enic |
+----+------+---------++-------------------------------+-----------+-
| 1 | 0 | 07:00.0 || VIC Ethernet NIC | enic |
+----+------+---------++-------------------------------+-----------+-
| 2 | 0 | 0a:00.0 || 82599ES 10-Gigabit SFI/SFP+ Ne| ixgbe |
+----+------+---------++-------------------------------+-----------+-
| 3 | 0 | 0a:00.1 || 82599ES 10-Gigabit SFI/SFP+ Ne| ixgbe |
+----+------+---------++-------------------------------+-----------+-
| 4 | 0 | 0d:00.0 || Device 15d0 | |
+----+------+---------++-------------------------------+-----------+-
| 5 | 0 | 10:00.0 || I350 Gigabit Network Connectio| igb |
+----+------+---------++-------------------------------+-----------+-
| 6 | 0 | 10:00.1 || I350 Gigabit Network Connectio| igb |
+----+------+---------++-------------------------------+-----------+-
| 7 | 1 | 85:00.0 || 82599ES 10-Gigabit SFI/SFP+ Ne| ixgbe |
+----+------+---------++-------------------------------+-----------+-
| 8 | 1 | 85:00.1 || 82599ES 10-Gigabit SFI/SFP+ Ne| ixgbe |