Installation Guide

ManualsBrandsTrex ManualsKitchenTranscend 4 in. x 4 in. Gravel Path Post Sleeve Pyramid Cap

HOW TO INSTALL DECKING

4b. Use center holes for inline applications and offset

oles for corner applications.

Install Guide Blocks

5. Place the two guide blocks onto post mount. Insert

elf-tapping screws (provided) to secure.

Install Railing System of Choice

NOTE: If installing a Trex® railing system:

ark screw placement on post sleeve for the

rail support brackets (RSBs).

re-drill screw holes through post sleeve and

aluminum guide blocks with a 1/8" (0.3 cm) drill bit.

ttach RSBs using 1-1/2" (3.8 cm)

. s

crews

(provided) for 4" x 4" (10.2 cm x 10.2 cm) Trex post

leeves.

» Attach RSBs using 2" (5.1 cm) screws (provided)

or 6" x 6" (15.2 cm x 15.2 cm) Trex post sleeves.

DECKING:

HOW TO INSTALL POST MOUNTS ON CONCRETE

NOTE: Cannot be used with Trex Transcend® Classic railing

or Trex Traditional railing styles.

PARTS

Inline

Offset

HOW TO INSTALL POST MOUNTS ON DECK BOARDS/CONTINUED

» (1) Post mount

» (2) Guide blocks

» (4) 3/8" x 3" (0.8 cm x 15.2 cm) Concrete bolts

» (4) 5/16" x 1" (0.8 cm x 2.5 cm) Hex (leveling) bolts

» (1) Leveling plate

» (4) Flat washers

» (4) 3/4" (1.9 cm) Self-tapping screw

» (8) 1-1/2" (3.8 cm) Stainless steel screws

» (8) 2" (5.1 cm) Stainless steel screws

HOW TO INSTALL POST MOUNTS ON CONCRETE/CONTINUED

TOOLS NEEDED

Position Leveling Plates

1. Using leveling plate as a template, mark locations

f the four holes and drill into concrete at least

3-1/2" (8.9 cm) using a 1/4" (0.6 cm) masonry bit.

Install Leveling Bolts and Level Post Mount

2a. Partially thread four 5/16" x 1" (0.8 cm x 2.5 cm)

hex (leveling) bolts in post mount. Place leveling

late on concrete holes aligned.

2b. Place post mount on leveling plate and adjust

/16" x 1" (0.8 cm x 2.5 cm) hex (leveling) bolts to

plumb.

Install Mounting Bolts

3. Secure post mount with four concrete bolts and

ashers.

NOTE: Torque recommended is 5 - 10 ft. lbs.