Installation Guide

100
SIGNATURE RAILING
100
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
ATTACHING STAIR BRACKETS (FIXED STAIR, STAIR SWIVEL, AND
COMPOUND SWIVEL) TO SIGNATURE POSTS AND PRESSURE-
TREATED POST AND POST SLEEVES/
CONTINUED
TREX SIGNATURE
Attaching Upper Stair Rails
16. Working from one end
of upper stair rail, snap
balusters into upper
stair rail working down
length of rail.
17a. For stair post to post
confi guration, attach
top stair rail to top
stair bracket (all types)
using two self-tapping
screws (provided)
on each side of stair
bracket.
17b. For stair crossover
post confi guration,
fasten upper stair rail
to swivel crossover
post bracket by
installing screws
diagonally through
crossover stair
bracket into upper rail
using two self-tapping
screws (provided) on each side.
NOTE: Pre-drilling is recommended (7/64”
[0.28 cm] drill bit) for attachment of stair railing
to stair bracket.
Attachment of Stair Bracket Covers, Skirts,
and Caps
18. Attach corresponding bracket covers over opening
in upper and bottom rails.
19. Attach provided post skirt to bottom of posts when
using Signature posts.
20. Attach post caps to Signature posts (use of rubber
mallet may be required for secure attachment).
21. Attach post caps to post sleeves using external
grade PVC construction adhesive.
20
Reveal
post
2
21
Post
sleeve
3
1
17a
17b
1
2
18
1
19
Reveal
post
2
16