Installation Guide

104
SIGNATURE RAILING
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
19. Place 2" x 4" (51 mm x
102 mm) on Signature
top stair rail.
20. Secure 2" x 4" (51
mm x 102 mm) to top
rail using Signature
Cocktail Bracket (sold
separately). Ensure
that there is a bracket at
each end of the railing
section, then space
brackets approximately
every 24" and attach
with 4 screws provided.
NOTE: Predrilling before
attachment is recommended.
21. Pre-drill a pilot hole and
toenail 2-1/2" (6.4 cm)
screw at each end of 2" x
4" (5.1 cm x 10.2 cm) into
post on back side of rail
(side not facing decking).
Attachment of Lower
Stair Bracket Covers,
Skirts, and Caps
22. See instructions on page 100.
NOTE: Top Bracket Covers are not attached in this
confi guration.
HOW TO INSTALL SIGNATURE TRADITIONAL STAIR RAILING/CONTINUED
TREX SIGNATURE
19
1
20
2
21