Installation Guide

112
SIGNATURE RAILING
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
11. Attach upper rail cover to upper rail by aligning
cover on one side of rail. Then starting from one end
of rail, snap cover onto opposing slot working down
length of rail. A rubber mallet may facilitate the
fastening, using GENTLE tapping.
Attachment of Bracket Covers, Skirts, and Caps
12. Attach corresponding bracket covers over opening
in upper and bottom rails.
13. Attach provided post skirt to bottom of posts when
using Signature posts.
14. Attach post caps to Signature posts (use of rubber
mallet may be required for secure attachment).
15. Attach post caps to post sleeves using external
grade PVC construction adhesive.
16. For crossover post
confi guration, attach
crossover post cap to
crossover post.
HOW TO INSTALL PANELS/CONTINUED
TREX SIGNATURE
1
11
3
2
1
14
Signature
post
2
Post
sleeve
15
3
1
1
13
Signature
post
2
1
2
12
16