Installation Guide

96
SIGNATURE RAILING
96
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
ATTACHING STAIR BRACKETS (FIXED STAIR, STAIR SWIVEL, AND
COMPOUND SWIVEL) TO SIGNATURE POSTS AND PRESSURE-
TREATED POST AND POST SLEEVES/
CONTINUED
TREX SIGNATURE
4. Set bottom stair rail into bottom stair rail brackets.
Attach bottom stair rail to bottom stair bracket
using two self-tapping screws (provided) on each
side of bracket.
How to Measure Top Stair Railings
(WHEN REQUIRED):
IMPORTANT NOTE: BEFORE CUTTING ANY TOP
RAILS MAKE SURE THAT WHEN MEASURING ALL
BALUSTER HOLES LINE UP PARALLEL!
When Using Fixed Stair Brackets:
5a. Place two balusters
into lower rail at each
end closest to post.
5b. Position top rail onto balusters (position to side of
post) and ENSURE that balusters are parallel with
post. Mark top stair rail at each intersection.
When using Stair Swivel and Compound Swivel
Brackets:
5c. Place two balusters into
lower rail at each end
closest to post.
5d. Position top rail onto balusters (position to side
of post) and ENSURE that balusters are parallel
with post. With brackets in correct swivel location,
measure distance from inside of swivel bracket to
inside of swivel bracket. Mark top stair rail at each
intersection.
1
1
4
2
5a
5c
5b
5d