Installation Guide

93
TREX
®
SIGNATURE™ RAILING
11. Place 2" x 4" (51 mm
x 102 mm) on Trex
®
Signature™ top rail.
12. Secure 2" x 4" (51 mm
x 102 mm) to top rail
using Trex® Signature™
Cocktail Bracket (sold
separately). Ensure that
there is a bracket at
each end of the railing
section, then space
brackets approximately
every 24" and attach
with 4 screws provided.
NOTE: Pre-drilling before attachment is recommended.
13. Pre-drill a pilot hole
and toenail 2-1/2" (6.4
cm) screw at each end
of 2" x 4" (5.1 cm x 10.2
cm) into post on back
side of rail (side not
facing decking).
14.
Attachment of Bottom Rail Bracket Covers
and Caps
See instructions on page 83.
15. Attachment of Foot Block
See instructions on page 97.
1
1
11
1
12
2
13
HOW TO INSTALL TREX
®
SIGNATURE™ TRADITIONAL RAILING/CONTINUED
TREX
®
SIGNATURE™