Installation Guide

43
HOW TO INSTALL DECKING
HOW TO INSTALL 4X4 AND 5X5 STRUCTURAL PORCH POSTS
PARTS
» Aluminum support tube
» Decorative column
» Filler strips
» Mounting plate(s)
» Post skirts (not provided)
» #10 x 1.000" screws
TOOLS NEEDED
Measuring and Cutting Aluminum Support
Tube
1. Measure opening height and cut aluminum support
tube 1/2" (1.3 cm) shorter.
Attaching Support Tube to Mounting Plate
2. Insert support tube into center of mounting plate
between outside tabs. Fasten with four #10 x 1.000"
screws (provided).
Measuring and Cutting Decorative Column
3. Cut molded decorative column 1-1/4" (3.2 cm)
shorter than opening height.
1/2"
(1.3 cm)
1
1
2
2
1-1/4"
(3.2 cm)
3
HELPFUL TIPS
» DO NOT lay vinyl parts on abrasive surfaces.
» 1/8" (0.3 cm) Tapcon anchors (not provided)
are recommended for installation on concrete.
» Use a carbide-tipped multi-purpose blade.
» If any components are missing or defective,
please call 1-800-BUY-TREX.