Installation Guide
16
DECKING
NOTE: Construction methods are always improving. Please refer to www.trex.com for the most up-to-date installation requirements.
Metal Framing Requirements and Gapping
Perimeter
joists
Adjust end
span framing
per manufacturers
requirments
Adjust end
span framing
per manufacturers
requirements
Double joist
spacing per
manufacturers
requiremenrs
Double joist
spacing per
manufacturers
requirements
13mm
max. overhang
Gap decking
width-to-width
5mm (All Temps)
Gap decking
end-to-end
3mm (>4°C)
5mm (<4°C)
Two screws
per joist
NOTES:
» When using an aluminum framing system or
other type of metal for sleeper systems, follow
manufacturer's instructions for proper installation.
» Depending on type of structure being used,
dierent types of fasteners must be used
for attachment.
» When using screws to attach decking to framing,
use two screws per every joist.
NOTE: Metric measurements are shown.
Convert to US measurements if necessary.