Installation Guide

20
DECKING
One-Step Hidden Fastener Tool
Handle Adjustment
Handle is adjustable and can be loosened and rotated
using a 3/16" hex tool to a comfortable position for
the user.
One-Step Hidden Fastener Tool Bit
The bit supplied with the Trex Universal Fasteners and
the One Step Tool are the same bit, and both are
compatible with the tool. Turned down T10 bits from
other manufacturers will also work, but please ensure
the turned down portion (the narrow nose) is at least
1-1/2" long. Using an inappropriate bit will not allow
fasteners to seat correctly and could damage the tool.
Bit is conveniently located on the underside of the
one-step tool. For replacement Trex® bits please visit
Shop.Trex.com.
The Hideaway
®
One-Step Installation Tool increases installation speed by allowing you to install the fastener in one
easy step. With this tool you can fully actuate the fastener and still install your next deck board, converting what’s
normally a two-step process into a one-step installation process.
2
1
1
3
1
2
2
TREX HIDEAWAY
®
One-Step Hidden Fastener Tool Instructions