Installation Guide

78
SELECT RAILING
Attachment of Top Rail to Post
7a. Slide top stair brackets on top rail (tab on bracket
should be facing up) on each side.
7b. Place top rail onto balusters, allowing the top rail to
rest on the surface of the balusters.
7c. Attach top stair bracket (both sides) to post
using four #8-10 x 2" (5.1 cm)screws per bracket
(provided).
Attachment of Bottom and Top Brackets to
Rails
8a. Install bottom stair bracket (both sides) to railing
using four #10 x 1" screws per bracket (provided).
8b. Install top stair bracket (both sides) to railing using
four #10 x 1" screws per bracket (provided).
Attaching Bracket Covers and Post Caps
9a. Snap bracket covers over top rail bracket.
9b. Snap bracket covers over bottom rail bracket.
9c. Secure post caps
with silicone or PVC
adhesive.
NOTE: Clean-up any
excess adhesive before
drying.
7a
8a
7b
8b
7c
9a 9b
2
9c
1
HOW TO INSTALL TREX
®
SELECT™ STAIR RAILING/CONTINUED
TREX SELECT™