Installation Guide

61
TRANSCEND RAILING
Attaching Inverted Universal Rail as Top Rail
8. Place inverted Universal rail onto RSBs with
balusters in channel. Attach Universal rail with two
self-tapping screws (provided).
9. Measure between posts and cut 2" x 4" (5.1 cm x
10.2 cm) to length.
10. Place 2" x 4" (5.1 cm x
10.2 cm) on Universal
rail. Attach board to rail
with 2" (5.1 cm) pan-head
screws (provided) every
16" (40.6 cm) on center.
Pre-drill a pilot hole and
toenail 2-1/2" (6.4 cm)
screw at each end of
2" x 4" (5.1 cm x 10.2 cm) into post on back side of
rail (side not facing decking).
11. Slide baluster spacer up and snap into Universal rail.
NOTE: If necessary, cut tips off rail gaskets prior to
installation.
Attaching Post Caps
12. Secure post cap
with silicone or PVC
adhesive.
NOTE: Clean-up any
excess adhesive before
drying.
HOW TO INSTALL COLONIAL RAILING/CONTINUED
TREX TRANSCEND
®
9
1
1
8
x2
2
1
1
10
3
2
2
11
2
2
12
3
1
Optional
HOW TO INSTALL STANDARD GLASS PANEL CROWN OR BEVELED
RAILING
TREX TRANSCEND
®
NOTES: Read all instructions BEFORE installation.
» You must purchase the 1/4" (0.6 cm) tempered glass
panels. See dimensions on right.
» Glass panels ONLY for use with maximum 6' (1.83 m)
on center post spacing.
» NOT recommended for stair applications.
TEMPERED GLASS PANEL DIMENSIONS
» 36" (91.4 cm) high rail:
1/4" x 30" x 63-1/2" max.
(0.6 cm x 76.2 cm x 161.3 cm)
» 42" (106.7 cm) high rail:
1/4" x 36" x 63-1/2" max.
(0.6 cm x 91.4 cm x 161.3 cm)