Installation Guide

TRANSCEND RAILING

HOW TO INSTALL ON-AN-ANGLE RAILING

TREX TRANSCEND

(CROWN AND UNIVERSAL RAILING)

HOW TO INSTALL ON-AN-ANGLE RAILING

TREX TRANSCEND

(BEVELED RAILING)

NOTE: Trex Railing brackets are designed to be installed

up to a 45° angle.

» Small angles (1° - 30°). Both 4" x 4" (10.2 cm x

10.2 cm) or 6" x 6" (15.2 cm x 15.2 cm) post sleeves

work well.

» Large angles (31° - 45°). USE ONLY 6" x 6"

(15.2 cm x 15.2 cm) post sleeves when installing on

ﬂat side.

» 45° angles using 4" x 4" (10.2 cm x 10.2 cm) post

sleeves MUST use Transcend bird’s mouth brackets.

NOTE: Railing will be installed on corner of posts.

» Using 6" x 6" (15.2 cm x 15.2 cm) post sleeves at

45° angles. Brackets are installed off-center and use

45° Transcend gaskets.

» Railing gaskets are designed to ﬁt at 0°, 22.5°, and

45° angles. Gaskets are labeled with appropriate

angle dimension.

NOTE: Trex railing brackets are designed to be installed

up to a 45° angle.

» Angle Range (1° - 45°). Both 4" x 4" (10.2 cm x

10.2 cm) or 6" x 6" (15.2 cm x 15.2 cm) post sleeves

work well.

» If installing at 45 degree angles, using 4" x 4"

(10.2 cm x 10.2 cm) or 6" x 6" (15.2 cm x 15.2 cm)

post sleeves, install brackets slightly off-center to

allow actual railing to be centered on the post sleeve.

» Horizontal railing gaskets are designed to ﬁt at 0°,

22.5°, and 45° angles. Gaskets are labeled in order to

ensure correct location.

4 x 4 6 x 6

Beveled

22.5° Gaskets

Beveled

45° Gaskets