Installation Guide

ManualsBrandsTrex ManualsOtherSelect 1 in. x 6 in. x 20 ft. Square Winchester Grey Composite Decking Board

SELECT RAILING

Extending and Securing Foot Block

5a. Extend foot block to seat on foot block base plate.

5b. With foot block fully

seated on base plate,

secure with two 3/4"

(1.9 cm) retaining

screws (provided).

Install one on each

side of foot block

1-1/2" (3.8 cm) from

bottom of base.

Push in screw plugs/

covers.

1-1/2"

(3.8 cm)

1-1/2"

(3.8 cm)

HOW TO INSTALL TREX

SELECT™ RAILING FOOT BLOCKS/CONTINUED

TREX SELECT™

Cutting Foot Block

6a. Dismantle foot block into two sections – this can

be done by fully extending the upper beam and

continuing to pull this through which will separate

the foot block into two sections.

6b. For stair applications, cut top section of foot block

at an angle to match rail.

6c. Re-assemble the foot

block by pushing the

upper beam through

the underside of the

base of the foot block

and allowing this to

catch/snap into

position. DO NOT fully

extend at this time.

Attaching Foot Block

to Bottom Stair Rail

7. Invert bottom stair rail.

Center foot block on

bottom rail and attach.

DO NOT extend foot

block.

Complete Stair Rails Installation

8a. Install foot blocks prior to installing lower rail as per

previous Select railing foot block instructions. For

stair application, cut top section of foot block at an

angle to match rail.

8b. Install Select stair

railing section as per

instructions provided

with Select Railing.

8c. Extend and fasten

as per previous

instructions.

HOW TO INSTALL TREX

SELECT™ FOOT BLOCK FOR STAIR RAILING