Instructions / Assembly

ManualsBrandsTrex ManualsComposite Fence GatesSeclusions 4 ft. x 6 ft. Winchester Grey Wood-Plastic Composite Privacy Fence Single Gate with Hardware

How To Estimate Materials:

Total

(=)

Quantity

# OF 9' POSTS W/CAPS

SDPFC050509 (Saddle); WGPFC050509 (Winchester

Grey); WBPFC050509 (Woodland Brown)

Item Subtotal

DIAGRAM LAYOUT HERE: (If necessary, refer to instructions above)

Fence Materials

CALCULATE MATERIALS HERE

Note: Does not include tax or concrete.

# OF SINGLE GATES W/HARDWARE

(gate opening = 46.25"). SDFGATEKIT (Saddle);

WGFGATEKIT (Winchester Grey), WBFGATEKIT

(Woodland Brown)

# OF DOUBLE GATES W/HARDWARE

(gate opening = 91.5"). SDFGATEDBLKIT (Saddle);

WGFGATEDBLKIT (Winchester Grey), WBFGATEDBLKIT

(Woodland Brown)

Price

(=)

# OF PRIVACY KITS

SDPFK68 (Saddle); WGPFK68 (Winchester Grey);

WBPFK68 (Woodland Brown)

070115

Example diagram: Trex fence with 8 ft. (max) post spacing

*Example 43 ft. length: 43 ft. ÷ 8 ft. post spacing = 5.37

sections, round up to 6 sections

Sections: 30 + Ending points: 3 = Total Posts: 33_

MATERIALS ESTIMATOR

877.700.8739 • Sales@TrexFencing.com • TrexFencing.com

1. Diagram your fence including all gate locations. For each

continuous run, mark starting points and ending points (see

example to the right).

2. Write the measurements for each line in feet. Determine

the section count by dividing each line on your diagram by 8

(always round up). Post spacing for Trex is 8 ft. on-center

maximum. Write the section count next to each line.

3. Total the # of sections (this will give you the # of privacy

kits to order).

4. Total the # of ending points.

5. Total the # of sections + # of ending points (this will give

the # of posts w/post caps to order).

# of Sections: ______

# of Ending Points: ______

Total # of Posts w/Caps: ______

■ Total # of sections = # of

privacy kits to order

■ Total # of sections + Total # of

ending points = # of posts w/post

caps to order

Privacy kit includes: 1-top rail; 1-

aluminum bottom rail; 2-bottom

rail covers; 19-pickets; 4-brackets;

24-screws. Posts w/post caps sold

separately.

Summary of content (1 pages)

PAGE 1
MATERIALS ESTIMATOR 877.700.8739 • Sales@TrexFencing.com • TrexFencing.com How To Estimate Materials: Example diagram: Trex fence with 8 ft. (max) post spacing 1. Diagram your fence including all gate locations. For each continuous run, mark starting points and ending points (see example to the right). 2. Write the measurements for each line in feet. Determine the section count by dividing each line on your diagram by 8 (always round up). Post spacing for Trex is 8 ft. on-center maximum.