SDS

Material Safety Data Sheet
Report No.: ZRLK1503130002 Page 5 of 9
Methods and materials for cleaning up Absorb spilled material with an inert absorbent (dry
sand or earth). Scoop contaminated absorbent into an
acceptable waste container. Collect all contaminated
absorbent and dispose of according to directions in
Section 13. Scrub the area with detergent and water;
collect all contaminated wash water for proper
disposal.
Section 7 – Handling and Storage
Handling Do not dismantle, open or shred secondary 18650
Lithium-ion Battery;
Don’t handling Polymer Li-ion Batterywith
metalwork. Do not open, dissemble, crush or burn
battery. Ensure good ventilation/ exhaustion at the
workplace.
Prevent formation of dust.
Information about protection against explosions and
fires: Keep ignition sources away- Do not smoke.
Storage If the 18650 Lithium-ion Battery is subject to
storage for such a long term as more than 3 months,
it is recommended to recharge the 18650
Lithium-ion Battery periodically.
3 months: -10℃~+40℃, 45 to 85%RH
And recommended at -20℃~+25℃ for long period
storage.
The capacity recovery rate in the delivery state
(50% capacity of fully charged) after storage is
assumed to be 80% or more.
The voltage for a long time storage shall be
3.7V~4.0V range.
Do not storage 18650 Lithium-ion Battery
haphazardly in a box or drawer where they may
short-circuit each other or be short-circuited by other
metal objects.
Keep out of reach of children.
Do not expose 18650 Lithium-ion Battery to heat or
fire. Avoid storage in direct sunlight.
Do not store together with oxidizing and acidic
materials.