Owner's manual

Multi-Dog Intensity Tip:
When training more than one dog check the dial to be sure you have
the intensity set for what you want for the dog you are about to correct.
Continuous and Momentary Stimulation
Continuous Stimulation
The trainer controls the timing of continuous stimulation. It stays on
while the transmitter button is pressed, up to a “time out” of about
9 seconds. If the stimulation times out, restore function by releasing
the button and pressing again. In normal use collars do not time out
because corrections are far shorter than 9 seconds. You can also tap
the continuous button repeatedly for a series of corrections.
Momentary Stimulation
The duration of momentary stimulation is pre-set. Momentary stays
on only briefly no matter how long the button is pressed. To produce
a series of momentary corrections, press the momentary button
repeatedly.
Using the Beeper
Complete information on the Beeper is in the separate manual included
with the Beeper. Pressing the Beeper control button on the back of
the Upland G2 transmitter turns the Beeper on or off at a distance,
up to the working range of the collar (up to one or two miles, depending
on your model). Also, any model covered by this Owner’s Guide
“T” The stimulation buttons produce tone instead of stimulation.
The meaning of the tone is determined by your dog’s training.
“A”Any transmitter button will operate the Beeper (see separate
Owner’s Guide accompanying Beeper). Future accessories will
also be operated with this setting.
The letter functions vary by model. Consult the Model Guide
for the features of your model.
Your G2 remote trainer can give stimulations at different levels so you
can find the best level for your dog’s temperament and your type of
training. Note that on all models, stimulation is only produced if the
dial is set on a number rather than on “N,” “T” or “A.”
There are two ways to change intensity level: by moving the
intensity dial or by selecting a different stimulation button.
For example, the buttons on several models will give you low, medium,
and high versions of the level selected with the intensity wheel.
Release the stimulation button while moving the dial.
When using the intensity dial the levels are:
1Very low intensity
2Low intensity
3Medium intensity
4Medium-high intensity
5High intensity
6Very high intensity